Hydraulic anchorage assembly

KIT Roof motor Nice SPY 550N 24V for automating sectional doors up to 9m2 and tilting doors (overflowing and non-overflowing) of a thickness not exceeding 10 mm. What. The SPY engine is ideal for residential use doors.

Universal LED flashing lamp, compatible with all types of power plants. Power supply at 230Vac / 24Vac/dc / 12Vac/dc

Electrically operated 230 V ALLMATIC KINEO 400for swing doors with blades up to 3 m (max 250 kg). Ideal for residential use and non-intensive use communities.

Allmatic electric motor of the type XTILUS 230 Vfor hinged doors up to 3,5 metres (maximum 400 kg), for residential or community use. Attachment support included. Traditional unlock key.

KIT engine Motorline OL1500 to 230V with oil and grease lubricated reducer for sliding doors up to 1,500 kg heavy duty and IP44 protection.

Motor gearbox Forsa BOXER 230Vac up to 1000 kg oil bath for sliding doors of heavy use.

KIT Hydraulic motor HYDOM 4LR Semi-intensive for swinging doors residential use up to 3,5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

2 channel remote control Somfy model Keytis 2 RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

Magnetic key reader and encoder LK-10

It allows the encoding of magnetic keys of 6 magnets basic codes, encodes key with central guide, left and right.

Electromechanical drive Erreka ZETA of 24 Vdc for residential sectional doors For the purposes of this Regulation, the following definitions shall apply:

KIT of 2 hydraulic motors EMFA Tor 2000, for heavy use swing doors of a maximum length of 4 metres per sheet ((600KG), with an elegant triangular design.

The Sprint Low is intended to insert some self-charging batteries by the same electronic board, which ensures its operation in the event of a power failure.

The kit consists of 2 batteries, the stand and the charging plate.

Kit Electromechanical motor Medva PW230K 24V for residential use swing doors for sheets up to 3,5 meters.

The PW230K engine is designed to power residential swing doors that we can give semi-intensive use.

24V DC control panel for Motorline barriers with programming via display, built-in receiver, obstacle detection, limit switches, automatic route programming, soft stop time regulation, maximum consumption for 1A motors, lock management, 23 Rolling code memories 433.92Hz.

" THIS PRODUCT HAS BEEN REPLACED BY THE MC60 PLATE "

Condor XC-009 manual cutting machine for saw keys.

Ergonomic design made of aluminium.

Possibility of use with internal battery for 60-100 cuts on a single charge.

Easy to transport, excellent quality, an ideal tool for mobile locksmiths or workshop workers.

Garage control of the CLEMSA brand, model MASTERcode MV12 two green buttons. The frequency of this remote is 433.92 MHz and coding is done by 8 switch system.

Engine Pujol SYROS at 230 V for residential sliding doors up to 600 or 800 kg.

New series of sliding motors Pujol with fixed anchorage system and built-in receiver box, which adapts easily to cancellation with m4 zipper and allows you to easily adjust the motor force.

Manoeuvre table for rolling shutter with built-in receiver for open source evolutionary 433,92 MHz designed to operate blinds in a simple and intuitive mode from 230 Vac up to 1000W.

An outlet for the complimentary light is provided and allows to connect photocells at 12/24V.

Outer receiver Clemsa MasterCode RV44, frequency 433.92 MHz 4 channel 230Vac or 12/24V ac/dc power supply.

Kit batería de seguridad 2 x 1,2Ah para motor corredera Erreka Dolfin

Table of manoeuvres DEA 200SR for use in 230Vac engines with race finishes by times.

The electronic plate is mainly used for the motor DEA 901L of tilting or preleving doors.

KIT engine Aprimatic XT2500L electro-mechanical 230 Vac for hinged doors up to 4 meters per leaf.

• Automation for bellow or dissected gates Motorline KFM, effective and robust intensive use with built-in central.

Multifunctional module for opening pedestrian doors by command.

External engine unlocking kit Forsa ERG with removable lock.

KIT external unlock for SPIDER or STC sectional engines.

Kit to unlock from the outside with key V2 AZIMUTH

The new TOGO VW remote control from Beninca uses a new 128-bit ARC encoding (Advanced Rolling Code).

The new encryption guarantees maximum security thanks to the security of the transmitted code (128 bits against the 64 of the previous TOGO).

Electronic card FAAC E045 for one or two 230V motors.

Table of manoeuvres for engine replacement TMP OTHER. What. Equipment designed to drive engines TMP JAGUAR Low direct current at 24V.

With built-in 433.92 MHz receiver and encoder.

Receiver base + decoder Erreka TAGBASE-250 for proximity keys RFID.

Interface relay for plug-in receiver power supply 230Vac or 12-24Vac/dc

The key and proximity card reader Erreka TAGREAD has been designed to allow access, through keys and proximity cards, in automatic door installations. The reader reads the code from the keys and proximity cards, and sends it to the TAGBASE decoder (not included).

Advanced MUTANcode programmer which allows RIFD management. Facility management by PC for access control.

MUTANcode and MUTANcode remote controls via PC and SW 3 software (Included).

" THE CLEMSA PT4 PROGRAMMER HAS BEEN DELISTED FOR THE HIGHER PERFORMANCE PT8 MODEL "

KIT Motor Came BK-1800 from 230V for sliding doors of up to 1,800 kg and up to 20 metres in length. What. It incorporates electronic card with programming display, built-in radio decoding and mechanical race endings.

Other, of circular cross-section V2 AGON for revolving doors with 76 axles and up to 360 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, shaft 76 mm in diameter, lifting capacity up to 360 kg and crown 240.

Multi-voltage led signalling lamp V2 I MEAN, WE...

Magnetic detector Forsa highly accurate which is connected to a coil which detects the presence of vehicles

(metallic masses) in a predetermined area.

Extension of the guide and chainof L=1000 mm for the Dea TEO 700 sectional engine.

Spare pine for engines CAME of the BX and BY series.

Container FAAC Model E for electronic cards

Garage crew Erreka Four channel IRIS, rolling code at 868 MHz.

Frequency module FAAC XF 868 MHz, compatible with all devices FAAC they are equipped with OMNIDEC universal coding systems, recognisable by the logo applied.

Electric motor kit V2 OTHER for use in the manufacture of motor vehicles residential buildings up to 9 m2.

Complete manual for sectional engine Erreka THAT'S IT.

Electromechanical engine V2 In the case of ATRIS 24V of a kind used in motor vehicles up to 15m2, with a starting force of 1000 N (100 kg)

Manoeuvre chart Erreka CLEVER03 for sliding and tilting doors analog 230Vac with soft stop option and end of run.