KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR35H 24V for heavy use swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

KIT Electromechanical engines DITEC PWR25H 24V for heavy use swing doors with a leaf length of up to 2.5 metres.

The irreversible actuator DITEC 24Vcc PWR25H is intended for frequent and intensive use. With machinery for making pulp of fibrous cellulosic material.

KIT 1 Electromechanical engine arm V2 CALYPSO irreversible at 230 V for residential sliding doors for sheets up to 2,5 m (CALYPSO400), 3 m (CALYPSO500), and 4 m (CALYPSO600).

The KIT includes:: digital control panel for 1 motor at 230V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

KIT Electromechanical engines V2 CALYPSO irreversible at 230 V for 2 residential swing doors for leaves up to 2,5 metres.

The KIT includes:: digital or analogue control panel for 2 motors at 230 V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

Motor gearbox CAME ATS in 230V and 24V irreversible format for swinging canopies with a leaf length of up to 5 metres. ATS actuators are ideal for powering residential (230V) and semi-intensive (24V) community folding doors.

Engine CAME BY-3500T for industrial sliding doors up to 3500 kg and 17m in length. Power supply 230 - 400 Vac three-phase, including electronic card and mechanical end-runners

Engine FAAC Reversible and irreversible version for community sliding doors for heavy use.

Engine FAAC S418 24V electromechanical for residential or communal high-voltage swing doors.

Roof motor kit MEDVA PG120 of 1200N for sectional doors of a thickness not exceeding 16 m2 with steel split guide with strap. It incorporates a 433 MHz receiver with easy programming via its LED display.

Electromechanical engine Erreka HIPPO three-phase 230Vac and 400Vac for community and industrial sliding doors up to 4000 kg.

KIT's articulated arm motors Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Motor with articulated arm Erreka 230Vac cyclone for swing doors up to 3.5 meters and 250 kg per sheet, ideal for powering residential doors where we have small spaces or wide pillars.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

KIT Hydraulic engine Aprimatic For the purposes of this Regulation, the following definitions shall apply:, ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

Hydraulic motor Aprimatic For the purposes of this Regulation, the following definitions shall apply:,ideal for powering community use doors with high vehicle traffic.

The hydraulic operator FORTY40BS for one- or two-bladed designed for continuous use with 100% working factor. What. It uses a 36 Vcc gearbox motor with «brushless» technology. It has an absolute linear encoder that allows an exact control of the position and speed of the door.

KIT engines Aprimatic R223 Irreversible electromechanical of 230 Vac for swing doors up to 2.5 metres per sheet, ideal for residential use.

Built on a sturdy injected and anodized aluminum chassis for outdoor use.

Engine buried and removable Nice M-Fab HS at 24 V for rapid operation of swing doors up to 3 m.

Buried and removable mounting, ideal for residential applications. Electromechanical motor gearbox 24 Vdc, with magnetic encoder.

Ideal for heavy use and fast manoeuvres: opening to 90° in approximately 8* seconds.

Operator Aprimatic REDMATIC BOX 24V for residential sectional doors of 600/800/1200/1800 N.Equipped with an automatic path recognition system, deceleration in opening and closing phases and anti-crush sensitivity.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

The ADVANCE N automation has been designed for sectional and tilting doors of piers up to 16 m, for residential use. It is a solution that is characterized by fast movement (19cm/s), low noise level and flexibility of use.

Motor chain drive DEA LATO for industrial sectional doors up to 35m2. What. Model in 230V and 400V version with manual or chain unlocking system.

Motor head PUJOL STC for sectional doors up to 10 m2 and 60 kg (STC600), or up to 15 m2 and 100 kg (STC1000) sectional doors. Built-in receiver maneuver board compatible with VARIO emitters.

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg. Version electromechanical 230Vac with built-in display. The COMEC 20 HE engine has the oil bath gearbox, prepared for intensive use and self-ventilated.

KIT Hydraulic engine Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Hydraulic motor Aprimatic FORTY 65 SP heavy use for hinged doors up to 6 metres in height. With installation of pump off the blade to prevent transmission of vibration the structure of the building.

Built-in anti-crush safety valves. Speed deceleration at the end of the route. 20mm diameter barrel and 270mm useful stroke.

Engine EMFA EXPY electromechanical 230V for residential sliding doors up to 600/800 kg. It 's incorporated receiver maneuver box 433 MHz, encoder and anti-crush system.

Engine FAAC 844 E R for industrial sliding doors up to 1 800 kg with magnetic running ends and anti-crush system.

Engine FAAC 746 E R for residential sliding doors up to 400/600 kg with magnetic running ends and anti-crush system.

Electromechanical engines DEA LOOK in 230V or 24V format for swing doors of 2 to 3 metres per sheet.

Engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

OXYGEN SARGON 230 V electromechanical motor for residential swing doors up to 4 m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

OXYGEN SARGON 230 V electromechanical motor for residential sliding doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

Electromechanical engine FAAC 550 for hinged doors up to 12 m2 with the possibility of using a second 'slave' engine.

OXYGEN ILIAD 230V hydraulic motor kit for heavy duty swing doors up to 4 metres per blade or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

OXYGEN PARIS hydraulic motor at 230V irreversible heavy use for swing doors up to 3 meters per blade.

The engines of the PARIS series incorporate double lock but the use of electric lock is recommended, they have a 240 mm stem for residential or community doors up to 350 kg.

Kit Electromechanical motor Medva PW530 24V for swing doors up to 4,5 m or 550 kg weight.

The PW530 engine is ideal for powering semi-intensive residential and community folding doors

Kit Electromechanical articulated motors Medva PA250 24V for swinging doors up to 2,50 meters per blade and 250 kg of weight.

The PA250 engines feature a built-in box-receiver, and are perfect for powering residential swing doors that feature wide pillars.

Kits OXYGEN ILIAD 230V hydraulic motors for heavy duty swing doors up to 4 metres per sheet or 800 kg weight.

The heavy duty ILIAD series engines are ideal for powering residential, community or industrial swing doors with a 285 mm stem. Allows it to be configured to work unlocked, locked or semi-locked.

OXYGEN NYX 230V motor for residential sliding doors up to 1,000 kg, with built-in box-receiver and mechanical racing ends.

The 230V NYX electromechanical motor is thought to power light or heavy doors up to 1,000 kg for residential or industrial use.

OXYGEN ARTEMIS 230V sliding motor for residential sliding doors up to 800 kg, with built-in receiver box.

The 230V electromechanical ARTEMIS motor is thought to power light or heavy doors up to 800 kg for residential use.

Kit's OXYGEN hydraulic motors at 230V intensive use for swing doors up to 3 meters per sheet.

The PARIS series engines are available in: the following paragraph is added: (lock on opening and closing) and REVERSIBLE format (without locking with which electrical electric lock would be needed for locking the sheets in the closure). The actuators have a 240 mm stem for residential or community doors up to 350 kg.

Kit's OXYGEN SARGON 230V electromechanical motors for residential swing doors up to 4m in length per sheet.

The SARGON series engines have a 400 mm stem and are designed for use in lightweight doors up to 250 kg.

Kit's OXYGEN SARGON 230 V electromechanical motors for residential swing doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

The actuator TRIK 24SILENCE 24 of 24Vdc has been designed to cover the market space of rolling doors made of aluminium or stainless steel slabs these doors require a quality actuator to perform silent and rapid manoeuvres with soft stops at the end of the run to avoid hitting the lock.

Motor kit CAME BKV15AGS at 36 V for sliding doors up to 1500 kg both residential and communal. Includes graphics card, Adaptive Speed & Torque Technology, 4 safety inputs, movement management and obstacle detection.