Issuer of the copy AERF a voltage of not more than 250 V for proximity/braking double GO 868 MHz.

Garage crew KEY 4 channel PLAY at 433.92 MHz with RollingCode type Keeloq coding.

Programming shall be carried out on the receiver button according to the instructions in the manual.

Telescopic straight arms BFT CAS1 for tilting operator BERMA.

• Telescopic pair length 1000 mm
• Machinery for making pulp of fibrous cellulosic material 2x2000 mm

Tube motor CAME MONDRIAN 5 KBS Bi-directional Ø45 with receiver incorporated 869.5 MHz to power domestic blinds.

The operator is powered at 230Vac and has a a diameter of 45 mm with the possibility of use in both round and octagonal 50 mm and 60 mm tubes. What. It has an electronic race finish with automatic regulation.

Kit of 2 12V 1.2Ah batteries for DEA LIGHTWEIGHT 24V with motor connection system and mounting plate.

Thanks to the 12V batteries we can use the LIVI/N 24V motor with battery system when we lose power.

Engine FAAC 844 E R for industrial sliding doors up to 1 800 kg with magnetic running ends and anti-crush system.

Infrared sensor FAAC XPB-ON presence and movement, with active infrared technology with background suppression.

The photocells FAAC MINISWITCH GLS function as safety aids. What. For its correct use, standard EN16005 should be taken as a reference in those countries where it is in force.

Box FAAC XK30 with unlock lever ideal for revolving doors to unlock the electro brake.

KIT Electromechanical engine 230Vac Erreka RINO for sliding doors, with built-in panel, ideal for installation in residential, community or industrial doors.

Adjustable forks for automatic barriers Aprimatic.

Unlocking pill Nice ROAD400 with two metal keys.

Control panel Clemsa CLAS25 for 24V tilting and sliding actuators. What. Maximum operating power 150W. Programming by pulse.

Passive band Erreka rubber bumper profile designed for automatic tilting, sliding or swinging doors.

Telescopic masts Motorline ZUMA without LED lights.

Replacement axle with pinion or gear reducer for Erreka IZAR, compatible with models IZ1C and IZS1.

KIT Electromechanical engine Pujol 24V P-504 with integrated manoeuvring gear for residential sliding doors up to 8 m2.

Table of manoeuvres CAME 2ZE5 for tilting engine E456.

KIT Electromechanical engines DITEC PWR25H 24V for two heavy duty swing doors with a leaf length of up to 3.5 metres.

The irreversible actuator DITEC The 24Vcc PWR35H is intended for frequent and heavy use. With machinery for making pulp of fibrous cellulosic material.

Table of manoeuvres DITEC LCU30H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible to further expand the functionalities of the facility with self-controlled security bolts, magnetic loop detector, Bluetooth module.

Plastic housing for sliding motors Pujol The Mini Marathon.

Pre-mounted guide for use on sectional engines V2 ATRIS. What. Available in chain version.

Unlocking lock FAAC with a custom key.

The engines of Motorline KVM205, KVM210 and KVM215 are three-phase three-axle traction motors powered at 230 V. With electronic end, for the automation of industrial sectional doors from 20m2 to 60m2, with possibility of horizontal or vertical application.

With a frequency converter system built into the power station, it enables smoother starts and stops and provides benefits such as: energy savings, process improvement and reduced mechanical maintenance.

Engine Motorline MCBS80 designed to execute opening and closing of tilting windows, blinds and skylights.

Tube motor FAAC "TM2 45 AND" 45 for domestic rolling shutters with an electronic running end for use wired by a wall switch.

Universal PUJOL micro receiver wired for 31 users RollingCode 433.92 MHz.

The power supply of this receiver is at 12/24 Va/Dc, 1-channel mono-stable.

Card battery system CAME for electricity supply in the event of a power failure. What. Compatible with sliding motors CAME BKV.

The system allows us to automatically recharge batteries. It does not include the batteries but you can use the universal ones regardless of their maximum capacity.

KIT Operator FORSA NEPTIS 120 Brushless to automate pedestrian swinging doors. What. With an internal opening guide and a digital function selector.

NEPTIS operators are designed to drive residential pedestrian beating doors such as private homes, offices, commercial premises, etc., as well as community doors such as lobbies or building doors to neighborhood communities.

NEPTIS is designed for doors of large dimensions and/or weight, as well as doors for public, community, commercial or emergency use.

KIT Electromechanical engine V2 "ATRIS 700' Irreversible 24 V other, of circular cross-section, of iron or steel, with a starting force of 700 N (70 kg).

HYDOM lathe of 1.4 m for the MINIMAX and ROTOR-UNIC engines.

Electronic plate Forsa ERG 24V replacement for the tilting motor, which has a display for programming parameters and memory of remote controls.

Table NO incorporates built-in receiver, must therefore be added in an additional form by inserting it into the corresponding socket.

Mechanical safety belt EMFA 70 mm by micro-switches, with cable voltage monitoring and sensitivity regulation.

It can be used for swinging or tilting doors, sensitive over the entire path of the band (including ends).

KIT Conductive safety-belt with unassembled aluminium and rubber 40 mm profile.

All kits come with 2-meter aluminium profiles, and the 40mm rubber comes to be easily assembled by gluing it on the front. On the other hand, each unit comes with its corresponding caps and resistance.

Table of manoeuvres Erreka ERTAIN for automatic glass doors.

The electronic board is ideal for use as a replacement in automatic glass door systems Erreka it's called the Ertain, Global, and Telescopic System models.

Central Motorline MC4 EVO developed for TUB and ROLLING roller motors up to 750W, with technology to be powered from 100Vac to 230Vac.

Its small size allows it to be installed in smaller spaces and with screwless connectors to increase speed and ease of connection.

Solar power system Motorline IT'S APOLLO.

Apollo is a solar power system that allows through sunlight, increase the charge of the batterya, thereby optimizing the efficiency and autonomy of automation. It's the solution ideal for remote gates to a fixed power grid and to simplify the installation, when it is impossible to pass electrical wires.

Electronic plate Beninca "CP.J3-SW' for sectional motors of the 24 V JM series.

Sliding engine unlock assembly DMIL TIFON 8 EVO.

The spare is made up of a knob, a bottle and a key.

Medva PC190 control panel for 1 or 2 24V to 160W engines, with digital display, connected for 24V electric lock, encoder and force regulation and soft stop.

Motor gearbox Pujol Marathon DC 700

Medva "FULL PRO FC" manoeuvre board for 1 or 2 230V actuators with encoder and electric lock output.

Motor unlock axle Pujol Marathon two.

Motor DMIL RAYO 1 electro-mechanical 230V with running end and encoder, for residential swing doors up to 9m2, the manoeuvre chart (DEVELOPMENT) built-in analogue and emitter compatible receiver Forsa 868 MHz.

The RAYO 1 EVO engine can be installed in 1 or 2 hinged doors.

Portable programming device with ROLLER CODE and EVO CODE.

• In the case of the IRPROGM handheld programming device
• A portable programming device that allows you to program memories and emitters roller code and evo code and quickly enable a new user.
• All this thanks to the possibility of automatically generating a series of correlation codes and downloading them to the receiver.

Table of manoeuvres CAME 801QA-0050 for one or two 24 V electromechanical vibrating motors.

The plant is powered at 230Vac and has a programming and indication display, self-diagnosis of the safety devices, Adaptive Speed & Torque Technology,

Electronic plate CAME 3199ZLJ14 for controlling 24Vdc actuators compatible with the AXO, FROG, FERNI, FAST engines.

Hydraulic motor FAAC 422 for residential or communal sliding doors of 1.8 m to 3 m each.