Plug-in traffic light card with standard connector a width of not more than 50 mm AERF (including Hydom, DEA, Medva, among others).

The ERA Keypad is a wired 12-key digital dial/keyboard, also with connection technology Nice This is BlueBUS.

Kits Linear hydraulic motors Erreka VULCAN intensive use for double swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Kits Linear hydraulic motor Erreka VULCAN intensive use for swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

KIT Motor Came BX-78 from 230V for sliding doors of up to 800 kg and of a length not exceeding 14 metres. What. It incorporates electronic card with programming display, built-in radio decoding, motion control device and mechanical race terminals.

" THIS PRODUCT IS DISCONTINUED, REPLACED BY MODEL OTHER OF A THICKNESS OF "

Table of manoeuvres Aprimatic A40DG designed to control one or two motors at 230V up to 800W per motor.

Saxo or telescopic gearboxes for Medva model HB1 engines

Table of manoeuvres V2 EASY2 230V analogue for roller blinds with courtesy light and automatic closure.

Security receiver by radio 868MHz Erreka RADSECRX that next to the issuer Erreka RADSECRX will get a two-way radio communication.

Clamp for guide of the ROSSO EVO with 350 mm

Tube motor Motorline for domestic rolling shutters and curtains with an axis of 35 mm.

Engines designed for: motoring blinds and curtains, indoor or outdoor, allows the application of various accessories to work with all types of pipes.

O-Box is the multifunctional interface that, through the dedicated software O-Box Software Suite”, allows you to configure and program directly with a PC or PDA, in a simple and intuitive way, transmitters and receivers other, of circular cross-section Nice.

Unlocking kit Nice KI1 from the outside with metal rope and key chain.

Other, of circular cross-section V2 AGON for revolving doors with axle 60 and up to 280 kg with electro-brake. What. Motor for spring-loaded industrial revolving doors, axle 60 mm in diameter, lifting capacity up to 280 kg and crown 200/220.

Table of manoeuvres BFT ALPHA SD for sliding doors and shutters. What. For residential use only, both in households and communities of owners. The functions can be programmed by LCD screen. It has a removable knob to connect accessories that extend the functionality of this control board. Up to 63 controllers with Rolling Code technology can be installed.

" THIS ELECTRONIC PLATE IS OUT OF CATALOG. THE NEW PLATE REPLACES IT SHYRA CPEM FULLY COMPATIBLE "

Plant developed to work with three-phase motors from 400Vac to 1500W. What. Ideal for use in STARK, KVM115 and KVM2020 engines.

Radar Motorline Small RAP50 microwave technology ideal for glass doors and pedestrians, which can be installed up to 4 m high.

Sensors are the electronic devices used to activate the door opening as well as to ensure the safety of users.

Motor kit CAME AXO Irreversible 24V for hinged doors up to 5 m.

Motor kit CAME Ver10plus of 1000N at 24 V for sectional doors up to 18 m with belt guide and Rollingcode Emitter.

Electromechanical engine BFT 24V 'KUSTOS BT A25' for swing doors up to 400 kg and 2,5 metres and 'KUSTOS BT A40' up to 500 kg and 4 metres.

Hydraulic motor Aprimatic LEVA50 intensive use for use in the manufacture of motor vehicles up to 10m2 and MAXILEVA50 for doors up to 16m2.

Hydraulic operator for one- or two-bladed counterweighted swing doors. Torque control valves incorporated. Hydraulic deceleration at the end of the journey. Intensive use. Hollow shaft.

Engine CAME ATS 8K01MP with 24V for use in the manufacture of motor vehicles up to 3 m per daya.

ATS is the universal telescopic engine for swinging canisters.

Engine Nice Spykit 650/800 BD with two-way control for sectional doors up to 10,5 m2 (SPY650) and 12,5 m2 (SPY800), for tilting, overflowing and non- overflowing doors, up to 11,5 m2 (SPY650) and 14 m2 (SPY800).

Control panel CAME ZL65 24V for one- or two-bladed swivels, with programming display, built-in radio decoding and self-diagnosis of security devices.

Casing or adapter Clemsa AD2000 for RFID readers of models CK40, CK42.

If the vehicle is equipped with an electric motor, it shall be equipped with an electric motor.

Designed for use in GEARBOX engines.

Kit of 2 grooved crankshaft for Medva BASIC H4 engine.

Machinery for making pulp of fibrous cellulosic material Erreka JESUS

Front cover with OPEN-CLOSE-STOP buttons for steering wheels Erreka I LIVE.

Engine Allmatic MOVEO for residential sliding doors for use in the manufacture of motor vehicles [1] with mechanical or magnetic track terminals.

Manufacture from materials of any heading DEA model of the vehicle for use with universal torsion bars.

Replacement motor electronic plate Pujol P1 three-phase.

Notes: the product does not come with the housing, it only includes the electronic board.

Other, of circular cross-section DEA SPACE N.

QBE is the innovative solution for a new generation home.

It allows you to remove wires thanks to the wireless connection and control, with a single tool, all automated systems inside and outside the home.

Traditional home automation systems are expensive and require specialized personnel to install all the necessary wiring.

QBE uses wireless technology, specially developed to control each electronic device without using wires.

In addition QBE connects in Wi-Fi mode to any router it is also important to note that the Commission has not yet adopted a proposal for a regulation.

Pair of safety photocells Beninca Pupil oriented 180o. Ability to synchronize up to 4 pairs. Power supply 24 Vdc.

Easy adjustment by LED indicating correct alignment.

Table of manoeuvres Beninca BRAINY for 1 or 2 actuators at 230 V ideal for swinging, sliding or swinging doors.

Wall support for flashing lamp CAME I KNOW.

Suitable for outdoor use (outdoor and waterproof).

NET-BOX is the bank programmer that reads, clones and customizes issuers and switchboards for doors quickly and accurately.

It's the programmer that allows you to manage the radio controls.

Machinery and apparatus Motorline for use in TUB45 engines.

Sliding engine EMFA "COMEC 20 HE' for industrial doors up to 2000 kg. Version electromechanical 230Vac with built-in display. The COMEC 20 HE engine has the oil bath gearbox, prepared for intensive use and self-ventilated.

Card Renault two buttons.

AB/BRACKET' roof mount for sectional engines DEA.

Safety deposit box DEA Blinds for placing external unlock device, ideal for sectional door unlocking cables.

Battery buffer 24V 1,6 Ah for sliding motor V2 THE TORQ.

Other, of circular cross-section Aprimatic RX1E 433 MHz for manoeuvre frames of the Apricode series with a capacity of 1000 codes.

It has four programming modes: Autocoding, Common Code, Urbanization Mode and Access Control.

Rolling code can be enabled by a jumper.

Modular receiver Aprimatic RX4MF 433 MHz 4-channel, fed at 24V with 70 code capacity.

It allows use of 4-channel remote controls and selection of mono-stable or bi-stable operating mode for each channel separately.

Passive band Erreka rubber bumper profile designed for automatic tilting, sliding or swinging doors.