Universal multi-frequency receiver, powered at 12/24V ac/dc for fixed and evolutionary codes 433,92 MHz and 868 MHz on AM and FM frequencies.

KIT engines Nice WINGO 24V electromechanical for two-bladed swing doors up to 2 m per sheet (model 4024) and up to 3,5 m per sheet (model 5024).

Control panel CLAS 1 for rolling stock and 230V blinds. What. Maximum operating power 750W. Programming by pulse.

It shall be capable of operating at a speed exceeding 100 km/h" designed to automate garage and commercial blinds a diameter of not more than 30 mm, and with a for use in the manufacture of motor vehicles.

The Bi-Motor has an electro-brake system to block the blind, and a knob to unplug it so that it can be opened manually in the event of a power cut. Automation is designed to work with with pulleys of 240/280 mm.

LED flashing light in version 90-240 Vac and 12-36 Vdc with an integrated 433,92 MHz antenna.

KIT Motor NICE model SPINKIT 650N for sectional doors up to 8,8m2 and tilting doors up to 9,8m2. What. Leash traction.

The version in KIT comes with pre-assembled guide of 3m SPIN11KCE.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

KIT engine Motorline SLIDE1024 to 24V with oil and grease lubricated reducer for sliding doors up to 1,000kg heavy duty and IP44 protection.

FAAC XR2 868 C external bi-channel receiver / 4 channels at 868 MHz. What. External receiver (system with decoder integrated in a custom case for external use).

Compatible with controls XT-2 and XT-4 which you will find under "Product Accessories".

This is the ENTREMATIC ZEN4 garage door, Rollingcode at 433.92 MHz with 4 channels.

The ZEN4 model replaces the old model DITEC GOAL FOUR.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Decoder Nice MORX for 1 ETP or up to 4 EDS/EDSI connected in parallel, with 1 BM1000 memory for 255 combinations.

External unlocking for the tilting engine Erreka ORION to start the engine in the event of a power failure.

Plug-in receiver card CAME reference AF43S for fixed code 433,92 MHz, compatible with the command TOP-432EE & TOP-434EE.

Receiver Erreka IRIN4B 4 relays for fixed code or rolling code (variable) at 433,92 or 868 MHz. Compatible with controls Erreka Moon, Kuma and Iris.

Motor kit CAME BXV10AGS at 24 V for sliding doors up to 1000 kg both residential and communal.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Sliding engine Motorline Manufacture from materials of any heading, except that of the product very heavy.

Developed and produced in Portugal, STARK is available in 3 versions, 4000Kg, 6000Kg and 8000Kg at 230Vac or 400Vac. What. More compact and modern, it also has quality mechanics, making it an elegant and reliable engine.

Aperture sensor through the pressure exerted on the carpet, with a weight capacity up to 800Kg. Ideal for access control where the only action required to open the door is to step on the carpet. What. It was developed with small spaces in mind, like store entrances or other places very close to hallways where, with a radar, there would be many false door openings

The universal receiver BFT Clonix 2E, you can connect any manoeuvring box on the market that has a voltage output of 12/24VAC/DC.

This receiver card has two channels for pulsing two actuators or electronic devices.

It has capacity for 128 additional transmitters in auto coding the working frequency is 433.92MHz

Multi-format self-adjustable hybrid emitter 4-channel for fixed and evolutionary code duplication Keeloq®, V2®, GO®, Nice® Flor.R ®, Ditec® and FAAC® SLH®. High copying capacity. Compatible with any type of fixed code: Mastercode®, Binary, Trinary, Multifrequency...

* Special prices for professionals. Contact us to open your file.

List of accessories for industrial sectional motors Erreka IT'S THE SKY.

Garage crew MEDVA model of the vehicle with 4-channel RollingCode coding at 868 MHz.

The new transmitter can be programmed remotely using a pre-programmed control or by pressing the "PROG EMISSORES" button on the receiver.

Chain coupling Nice THAT'S GREAT.

Electronic plate CAME ZL56 for 24 V V900E sectional motor, ideal for use as a spare or replacement.

Universal two-channel receiver of frequency AM 433.92 MHz, mounted in a case with protection grade IP54. Works with all Came transmitters of the TOP/TAM series of 433.92 MHz. What. Both channels normally operate in ”mono-stable” mode, but on channel 28 you can choose, as an alternative, the bi-stable” (switch) mode.

Superman is a universal command of Xhorse with 3 MQB type buttons and multifunction with built-in SUPERCHIP which clones ID46, 4D, 4C, ID48 and 8C.

It does not include sword so it must be included according to the command to generate or clone.

Electromechanical engine FAAC 550 for hinged doors up to 12 m2 with the possibility of using a second 'slave' engine.

OXYGEN SARGON 230 V electromechanical motor for residential sliding doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

NICE ROA37 manoeuvre chart for sliding engine THOR 1500, incorporating a receiver with RollingCode 433,92 MHzcompatible with FLOR and SMILO emitters. The programming is analog using micro dip switches.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

LED signalling lamp V2 BLINKO multi voltage from 24 to 230 V.

Triangular unlock key FAAC.

Unlock key V2 It's called Calypso.

Unlocking lock assembly PZ.38 for sliding engine TMP Sprint low. Includes two keys.

KIT Electromechanical engines V2 CALYPSO irreversible at 230 V for 2 residential swing doors for leaves up to 2,5 metres.

The KIT includes:: digital or analogue control panel for 2 motors at 230 V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

Wi-Fi gateway CAME to connect the operator to the Cloud via a wireless network or locally via Bluetooth mode.

Engine axle traction Motorline ROLLING for retractable doors, robust and easy to install for retractable bars, with electro brake for shutter locking.

A torus transformer Pujol Marathon DC 700KG a voltage of not more than 80 V.

Garage crew LIFE FIDO RollingCode 433.92 MHz with two channels.

Garage control of the CLEMSA brand, model MASTERcode MV123 three green buttons. The frequency of this remote is 433.92 MHz and coding is done by 8 switch system.

Light crown of red/green LED barrier lights CAME Gard GT4.

Other, of circular cross-section Forsa THIS IS UNIKO EVOLUTION.

Electronic plate CAME & MOTOSTAR XS100.

I'm not going to tell you what to do with a built-in 433.92 MHz manoeuvre frame compatible with VARIO controls.

The electronic plate has a socket to add a 6-pin receiver card externally.

Hydraulic oil Aprimatic AF32 (APRIMOIL) of 1 litre for reciprocating or hydraulic motors.

SOMMER APERTO sectional motor "A 550 L" or "A 800 XL" for connectable doors, with separate control unit of the engine, receiver and integrated WiFi module.

KIT Strap BFT ARGO T2.5 - 245 - 98 teeth (2 UNITS)

Longitude 4mm.

RadioBand Prastel TCO7SG-KIT for safety bands resistive 8.2 KΩ where its radiofrequency link to 868 MHz between Emisor and Receptor makes it an excellent choice for the use in residential or community doors of the type sliding doors, tilting or canceling battens.