Multiple card connector Clemsa for use in the manufacture of motor vehicles Clemsa with exits from connection 4 pins + 6 pins.

Saxo electric motor DEA 902 LIGHT.

Rechargeable battery CR2032 of 3.6V 180o to replace BMW.

This is the second generation of the MINGARDI MICRO 02 KIT 230V.

Chain actuator on top with hinged windows and sash windows.

Replacement rear fork Clemsa A300/400.

Hose cable 8 threads + screen (Erreka).

Quick support Erreka SENA-C for compact drawer.

Plug-in receiver card1 channel, with a capacity of 400 codes or 1000 codes, for plugging into manoeuvring frames with standard 4-pin connection, specially designed for CLEMSA frames. The encoding of the memory card is done with the PC-Copy duplicator.

Motor gearbox FAAC D1000 / GENIUS ZODIAC 100 / CLEMSA AS60-120

Garage crew CAME model TOP-434EE with 4 channels, fixed code at 433.92 MHz with self-learning recording system with a pre-programmed control on the receiver.

Other, of circular cross-section CAME MONDRIAN 4

Hit the chain DEA simple 1/2 times 1/8.

12mm resistant safety band kit.

The band is prepared to be mounted directly into the installation wirelessly through a RadioBand.

Hydraulic motor HYDOM 4LR Semi-Intensive for swing doors for residential use up to 3.5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.

Keyboard Erreka with a thickness of not more than 10 mm for access to housing or commercial premises. With output of 2 NA/NC relays and up to 250 codes.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

The electromechanical actuator Erreka ARES is designed to drive automatic doors for use in the manufacture of motor vehicles.

Easy installation with two stem sizes (300mm and 400mm race), economic range, with obstacle detection and electronic soft shutdown.

Side bar or bar with bucket for tilting motor Erreka THE ATLAS.

Longingtwo meters per unit.

Electromechanical safety belt Clemsa, under the supervision of the cable tension and with sensitivity regulation. What. Recommended use for folding doors. Sensitive throughout the course of the band (even extremes).

Electromechanical engine Clemsa TO 300 for folding doors up to 3 metres in length per sheet, of semi-intensive residential use. 

Hydraulic motor for tilting doors one or two-bladed counterweights with a not more than 14 m2, for residential, community or industrial use.

Driving FAAC D600 electromechanical 24 V by drawing for doors other, of circular cross-section and spring swings and counterweights for residential use.

Curved arm Motorline reference ARC007 other, of circular cross-section type ROPER or not overflowing.

The curved arm is necessary for most Roper manufacturer swing doors.

KIT Electromechanical engine V2 AZIMUTH irreversible for sectional and tilting doors up to 8 m2.Starting force 500 N 50 kilos .

Engine DEA REV in 230V and 24V version for sliding doors of community use up to 1400 kg.

The REV series engines are equipped with a 433 MHz integrated receiver gearbox and electromechanical or magnetic terminals.

Tube motor Motorline designed to power chest-type arm curtains, allows the application of various accessories to work with all types of pipes.

Sectional engine guides Pujol STC600 & STC1000, pre-assembled in two pieces in aluminium or iron format.

Other, of circular cross-section V2 SENSIVA synchronized and oriented 30o.

Electronic plate for replacement Clemsa FAAC 740, 741 and 748 of sliding doors at 230 V.

230Vac or 12-24Vac/dc plug-in receiver relay interface, with a programmable channel allowing the use of a plug-in receiver in installations without radio connector.

Usable in all types of temperatures between -20/+60.

Valid for any ERREKA receiver.

Kit's OXYGEN hydraulic motors at 230V intensive use for swing doors up to 3 meters per sheet.

The PARIS series engines are available in: the following paragraph is added: (lock on opening and closing) and REVERSIBLE format (without locking with which electrical electric lock would be needed for locking the sheets in the closure). The actuators have a 240 mm stem for residential or community doors up to 350 kg.

Electronic card 780 D for sliding motor FAAC 746 and 844.

Plaque with Cross mark CAME MONDRIAN 4

Box battery 24V Nice PSY24 with control circuit and transport handle, intended for use with the Solar Solemyo KIT.

Silentbloc rear rubber hood hydraulic engine swing Hydom 3LC.

Key to unlock engines Motorline.

Engine Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Issuer CAME TOP44RBN encoding RollingCode and FixedCode 433 MHz.

String Motorline ROSSO EVO

Spare belt for dry motor Motorline ROSSO EVO, compatible with ROSSO EVO models, 60, 100 and 120.

Quartz transmitter Aprimatic tG2C model of two channels, fixed code, quartz to frecuencua 27.195 MHz. Programming by placing dip-switch.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

KIT engines Clemsa AA30 230 V electromechanical two-bladed swing doors for a maximum length of 3m by sheet. What. The AA30 model is ideal for automating residential doors for non-intensive use.

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

KIT Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Garage crew Telcoma EDGE two channel rolling code 433.92 MHz.

Electromechanical engine Clemsa AA400 for swing doors up to 4 metres in length by leaf, designed for motorized residential use door. What. The model "AA400 424 B" allows us to perform a semi-intensive use motorization.

External engine unlocking Erreka sections for emergency locking.

Electromechanical motor of 24 V dc MEDVA PL500 for sliding doors of residential use up to 500 kg with built-in receiver box and 2 RollingCode controls.