Garage control Hörmann HSE4 868 BS BiSecur frequency is 869.3 MHz.

Garage crew Clemsa model MUTANcode N82 two channel, RollingCode 868 MHz.

" This model has been replaced by the model MUTANcode N82M "

Module for the operation of 2 open-stop-close automatic systems in single or multi-group mode.

Replacement plant for Nice TN2030L and TNLKCE.

Control panel for sliding doors and barriers with 1 motor 24Vdc. What. Selection of functions through a display. With obstacle detection and device self-diagnosis. Control panel with control of a transmitter via display. Includes TCT transformer.

kit Engines Allmatic HYPER IRREVERSIBLE 24V electromechanical for residential swing doors and condominium with 400mm or 600mm stem.

Fixing supports included.

Extension of 1 m for guide SNA30 on strap.

Plug-in card Timed garage light, designed to switch on the garage light instead of the usual timer when starting the manoeuvre opening the manoeuvre box.

It incorporates a 16A 230V voltage-free contact relay.

The card is self-powered by inserting it into the appropriate maneuver box connector (usually a traffic light card connector).

Self-contained keyboard Erreka for use in the manufacture of motor vehicles via battery-powered radio.

KIT engine Erreka SKY chain drive for industrial sectional doors up to 50m2. What. Available in single phase 230Vac and three phase 400Vac.

Guidance for the extension of 0.8m + motor chain Nice SPIDO 600, PLEASE.

Guidance for the extension of 0.8m + motor belt Nice SPIDO 600, PLEASE.

Full race finish (box with electronics) for retractable motor Clemsa AR2581.

KIT Motor reducer BFT MANUFACTURE FROM MATERIALS OF ANY HEADING

Electrically locked vertical EBPE 230V with external unlock.

" THIS PRODUCT HAS BEEN DISCONTINUED BY THE MANUFACTURER, REPLACED BY THE LOCK THE "

Electromechanical engine EMFA ROT MEC at 230V for residential tilting doors up to 8m2.

Self-locking mechanism with built-in box-receiver 433 MHz to drive 1 or 2 sheet counterweighted tilting doors.

Accessory for placing the EF30 electric lock in an upright position for ground closure.

Module for the operation of 1 automatic open-stop-close in single or multi-group mode.

This module allows you control space lighting through the MCONNECT mobile app anywhere. What. Designed to be easily installed behind the wall switch, without overriding normal lighting control.

This module enables the opening and closing of blinds and blinds via the MCONNECT mobile application and it can be easily installed behind the wall switch.

For your convenience, you can set automatic opening and closing times. What. Also, because it's a Wi-Fi module, you can control the devices from anywhere and check their position.

Safety sensor with infrared sensors Erreka OTHER. What. It combines door activation and pedestrian safety in one product.

Fixed 433 MHz low frequency code duplicator compatible with D555 transmitters.

Central command Nice DPRO924 for 24V sectional door motors, other, of circular cross-section, suitable for Sumo.

Adapter for axles with a diameter of 31,75 (1,1/4”) - 35 - 40 mm.

Axis with 18-tooth pinion Ø 25,4 mm Ø int. the crown 25,4 mm.

1/2 Cad chain, 1 m package with coupling Nice THAT'S GREAT.

Make any control panel with a 6-pin receiver card socket accessible over the Internet, with the system CloudFort. What. Actionable via App or web.

The MICRAC PLUG receiving card it's one of many devices we can find for the platform CloudFort, which it will allow us to operate our automatism remotely or automatically creating automated routines by time uses.

Motor centre axle ACM K545 EF, with 1-coil electrobrake resized for 76 axle and pulley 240mm, for roller shutters up to 250 kg.

Universal module of Erreka for use in the manufacture of motor doors with your mobile or landline phone at no extra cost on the call.

The module shall be connected to any manoeuvring gear having a 12/24Vdc power output and an alternating pusher output (NO).

Engine Beninca Electromechanical ZED version 230V or 24V for counterweighted residential swing doors up to 12,5m2 with built-in central and encoder.

Irreversible electromechanical gear motor for residential counterbalance swing doors. Available in 230Vac and 24Vdc versions with or without mains. Courtesy light, race finishes and built-in control buttons.

Pair of galvanized tubes with striated casing Ø 21.2 mm L. 1500 mm.

Straight galvanized pair of arms with striated housing Ø 21.2 mm welded with attachment fittings (L=2000 mm).

Digital keyboard Beninca BE.PLAY anti-vandal with metal wire, with illuminated stainless steel numeric keys.

4V 150mA solar panel with rechargeable battery box powering the transmitter MX14.

Receiver Nice OX4T which belongs to the ONE series and has a built-in transmitter where it can act as a repeater.

A width of not more than 30 mm".

Control panel Clemsa CLAS 107 for 230 V swing door actuators.

Control panel Clemsa Class 382 for 230 V sliding door actuators.

" This table CLAS 382 is de-cataloged and replaced by the model FAAC 740 "

KIT Integrated Electromechanical Motor Erreka MAGIC for smooth doors designed for domestic or industrial cancellations up to 3.5 meters by leaf.

Pensed for all types of residential doors both iron and aluminum.

" The manufacturer Erreka has decatalogued this product "

Plates, sheets and strip CAME for: MOM 5, MOM 6 and MO6. Measures 100 x 100 mm .

5 channel transmitter for tube motor MTM frequency 433 MHz.

Automatic barrier CAME CAT ideal for access management in private and public contexts for road control. What. It is an automaton with 2 automated pillars with a chain to regulate the passage of vehicles.

Manufacture from materials of any heading Hormann R275 with closed base. What. Locked base with lock and three keys. Impact resistance of 40,000 J.

Traction parts with square 20 for Hydom ROTOR-UNIC engine.

He's thinking about the old model rotor engine with a "square" casing so he can adapt it to the new hardware.

Emergency fence (STOP) with watertight case to stop the automatic in case of emergency.

Kit of two PC170 batteries at 12V & 2,2Ah for the Medva PW series throttle motors.

Garage crew JCM 1 channel RollingCode at 433 MHz.

The emitter has a stand and keychain.

" THE ONE-BUTTON NEO10GIB EMITTER HAS BEEN DECLASSIFIED BY JCM, AND THEY'LL ONLY MAKE IT IN 2 BUTTONS. WE HAVE THE MODEL IN STOCK THE NEW 20GIB"

A universal blade extractor with punches.

Robust structural base for easy removal of folding car key studs. Designed to disassemble the razor keys easily and without losing the bolt or any other small piece, it includes the necessary punches of different sizes.