Safety equipment

Resistive safety band 8K2 Clemsa with a length of not more than 20 mm.

The safety belt is an anti-crushing system, which reverses the engine manoeuvre in case of contact with the soft rubber. It is installed on edges that can trap people or objects that may be accidentally encountered in the path of automation.

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel.

ANDthe radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected.

" The safety belts on the product accessories are fully compatible "

Other, of circular cross-section Erreka 12-24Vac or 12-36Vdc

GEBA safety photocell with 12/24V cathode ray mirror.

GEBA TRONIC's photocells are of the highest quality, manufactured in Germany and distributed throughout Europe offering high reliability for use in automatic doors with motorised doors. They have some springs on the inside to adjust vertically or horizontallyand the infrared beam to fine-tune the adjustment to the cathode ray mirror.

Adjustable photocell with battery (from 0 to 210o) 12-24V The FT04 photocell (TX + RX) is specially designed for the industrial and private door market. The sensor complies with the regulations for motor doors in Europe. Its shape makes it easy to mount on the wall.

Carlo Gavazzi security camera with cathode ray mirror, multi voltage (12/24V or 220V) with a maximum range of 12m.

This photocell is designed to withstand adverse industrial environments. What. The distance of detection of 12 m this makes it very useful in applications where dust and weather conditions affect the detection capacity. Housed in a other, not further worked than hot-rolled with two stop presses for easy connection.

Safety photocell Erreka FT08 with mirror.

FT08 photocells are designed to detect obstacles in automatic door and gate installations, preventing the door from colliding with them.

They consist of a transmitter-receiver module and a mirror. The module emits an infrared beam which is reflected in the mirror and returned to the module.

If the beam does not return to the module, the contacts of terminals 1 and 2 change state.

Pair of photocells Nice It was PHOTOCELL S with transmitter-receiver operation.

The models EPSB and EPSAB have the BlueBus technology compatible with some Nice which allow the photocell to be connected with only two wires where they will receive power and the safety contact.

Security photocell with mirror model Era Photocell M 12/24v for distances up to 15 metres.

Emitter with mirror. Orientation and sensitivity regulator. The output of the relay shall be 500 mA / 48 V

Circular reflective cathode-ray mirror for safety photocells, standard for any type of brand. The diameter is 85mm.

Manufacture from materials of any heading Motorline the MFE model, external modulated reflector with mirror, with rated range of 12m.

Because it is a mirror photocell, it does not need any cable passage to the other side because it emits an infrared signal that reflects in the mirror on the opposite side and receives it again.

For the purposes of this Regulation, the following definitions shall apply: Motorline model MF30 with a maximum range of up to 25 metres.

For the purposes of headings 8521 to 8528.

The holder is for a standard circular reflective retro-reflective mirror for any type of mark. The diameter is 85mm.

Wall security photocell FAAC XP20 steerable transceiver system with a maximum range of 20 metres and IP protection.

This auxiliary safety device is used for all types of garage doors and locks, reversing the maneuver in case of infrared beam cut.