Joint armband in aluminium DEA GEKO/X/BA

Motor gearbox Clemsa AB for tilting doors or chain drag.

Engines for tilting doors models Clemsa AB 2315 FC, AB 2350 / 2350 FC, AB 2360 / 2360 FC, AB 2362 / 2362 FC, AB 2364 / 2364 FC, AB 2366 / 2366 FC, AB 2368 and AB 2369 have been developed to be used as an engine element in all types of docks and counterweight doors.

They are robust, reliable and suitable motors for continuous and heavy work. No maintenance and very quiet.

Pivote without-fin Motorline PERSA

Other, of circular cross-section Aprimatic RX2R for Apricode paintings.

Mastil Barrera Motorline 8-foot MBM8.

Final change of career Motorline ROLLING160SP

Curved arm CAME adapter for partially overflowing tilting doors. Maximum door height: 2.4 m.

Pinion or wheel dented dry motor CAME V600.

Electronic central budget Erreka RINO AP600S002 of 230V.

Electronic plate DEA TE700

Support Motorline for the installation of electromagnetic locks in door frames.

Motor head Nice SPIDER 1200N Brushless with WiFi + 2 MYGO4 + ML.

Engine Nice SPIDER 1200BL WiFi integrated for sectional doors up to 17m2 or for a sheet of up to 19.5m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi integrated able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

Feeding group FAAC A100 Compact,is a feeding unit specifically designed for automatisms a100 Compact series sliding doors FAAC. This component is essential to ensure the correct functioning of the models A100, A140 AIR and A140 AIR T.

Medva hydraulic oil

Hydraulic oil drill for Medva motors. Packaging in 1 liter.

Electro-locking kit to block automatic doors Motorline KAPVSP or KAPV100.

Replacement End of career Forsa VENUS left with their microinterruptors and connected.

End of race with magnets for sliding motor FAAC 746/844.

VDS PM and PM1 electromechanical motors for batten doors residential use up to 3.5 meters long.

Receptor CAME RKLT-W50 for mechanical tubular motors up to 50 Nm and 500 W.

Bulb and two keys for unlocking the ROGER sliding engines.

Receptor Clemsa Long-range Mutancode RNE 248 U LR in frequency 433.92 MHz and 868.35 MHz designed to deliver maximum performance and security in access automation systems. This model has 2 relay outputs, which allows to control up to two different accesses, such as garage doors, automatic gates or alarm systems.

Caps BFT CPS heavy-duty SUB cement welding case I099415 2600635.

Pack with 2 units.

Special 220V receiver base for electric locks or electric locks. What. It has independent terminals for output at 12Vac, 12Vcc or 24Vcc.

Ideal for controlled door opening (doors, office, etc.), controlled by remote control, or by an external button.

NICE A01 manoeuvring chart of 230 Vac, for single-phase motors with retractable doors, not automatically closed. It incorporates a RollingCode 433.92 MHz receiver for the Flo, FloR and Smilo transmitters.

BOX NICE A01 HAS BEEN REPLACED BY THE NEW MODEL MC200, CLICK HERE TO SEE IT.

Blister of the brand GP. What. This is a 3V CR2450 lithium battery.

Blister of the brand GP. What. This is a 3V CR1220 lithium battery.

Outer receiver CAME model RKLT-50 for powering electromechanical end-of-course blinds, awnings and curtains up to 50 Nw.

" This model has been replaced by the RKLT-120 with higher benefits "

Adjustable support for vibrating motor Erreka model VULCAN and VULCAN D.

Table of manoeuvres Erreka Digital SMART-D201 for 1 or 2 motors pulsing at 24Vdc and electric lock output.

The SMART-D201 table is valid for DC motors: TEMIS, KAIROS and ARES.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.

KIT Electromechanical engine Erreka CALYPSO CA53 of 230Vac to automate residential doors of a sheet up to 3m and 300KG.

The Kit features a VIVO-M101 maneuver box for a 230Vac drive, receiver card, KUMA handles and safety photocells.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Engine Nice WINGO HS electromechanical for rapid actuation sliding doors with blades up to 3 metres or 200 kg. Ideal for automating residential folding doors.

Central Motorline model MC41SP, 24Vdc for racing motors with end-of-run, automatic shut-off, speed reduction on opening and closing, built-in receiver with memory for 30 codes.

" This model has been replaced by the MC60SC "

Electronic switchboard Motorline MC50SC single-phase 230Vac sliding door, with built-in receiver, possibility to store in memory 99 Rolling Code total opening codes plus 99 pedestrian opening codes.

" THIS PRODUCT HAS BEEN REPLACED BY THE PLATE MC50 "

Receiver AERF "SRM 1L4255" for outdoor use 12/24V with 2 channels, rolling code 433.92 MHz.

Motor gearbox V2 alfariss irreversible electromechanical model with 24V for sliding doors up to 300 kg in weight. With obstacle detection, encoder, steel pinion and precise magnetic race ends.

* THIS ENGINE HAS BEEN REPLACED BY THE MODEL TORQ OF 24V UP TO 500 KG *

4 channel remote control Somfy model Keygo RTS for garage doors and frequency cancellation Rollingcode 433,92 MHz.

Engine Erreka Sirius electromechanical 230Vac and 400Vac by chain transmission for hinged doors up to 50 m2.

Recommended installation in community and industrial doors.

KIT electric motor for residential use, BFT model"PHEBE BT A U C" for automating swing doors of up to 8m2.

Electromechanical operator for residential use to automate tilting garage doors.

The integrated control centre, allows the operation of a second engine for large doors or with an integrated pedestrian door. For tilting doors up to 10m2 with installation of two motors.

In addition, microprocessor technology allows the torque of the motors to be controlled with maximum precision and complete safety.

The radio system simplifies even complex installations, eliminating the need for wiring between the safety band and the automatic control panel.

ANDthe radio system consists of a receiver XR S 868, communicating with an emitter XT S 868, to which one or two 8,2 Kohm resistive safety bands or auxiliary devices may be connected.

" The safety belts on the product accessories are fully compatible "

The ERA Keypad is a wired 12-key digital dial/keyboard, also with connection technology Nice This is BlueBUS.

Kits Linear hydraulic motors Erreka VULCAN intensive use for double swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Kits Linear hydraulic motor Erreka VULCAN intensive use for swing doors residential, community and industrial with a maximum leaf length of 4 or 6 metres depending on the chosen stem.

Electromechanical engine Forsa SURF 300 for swing doors with sheets up to 3,5 metres and 300 kg of weight.

KIT Motor Came BX-78 from 230V for sliding doors of up to 800 kg and of a length not exceeding 14 metres. What. It incorporates electronic card with programming display, built-in radio decoding, motion control device and mechanical race terminals.

" THIS PRODUCT IS DISCONTINUED, REPLACED BY MODEL OTHER OF A THICKNESS OF "