Motor electromecánico irreversible CAME E456 con encoder sin cuadro incorporado para puertas basculantes residenciales de hasta 9m².

El actuador electromecánico monofásico a 230V cuenta con bloqueo y control por encoder con una potencia de 200 W y un par de 420 Nm.

KIT 1 Electromechanical engine arm V2 CALYPSO irreversible at 230 V for residential sliding doors for sheets up to 2,5 m (CALYPSO400), 3 m (CALYPSO500), and 4 m (CALYPSO600).

The KIT includes:: digital control panel for 1 motor at 230V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

High quality 12Vdc/7Ah battery which guaranteed the reliability of power systems such as UPS, and emergency power in engines and alarm systems.

Barrier rail CAME Aluminium GARD painted in modules of 2 metres in length. Compatible with the automatic GARD barriers.

Hang 3 knots of iron or zinc for tilting doors.

Original spare engine for operator BFT THE EOS 120. This spare is completed as shown in the figure and can only be used by the operator BFT IT'S 120.

Wi-Fi gateway CAME to connect the operator to the Cloud via a wireless network or locally via Bluetooth mode.

Vertical electric lock BFT "EBP AC A' of 230 V.

Electric vertical floor lock, for automating swing doors. It is an important accessory for completing an installation and for safeguarding the gear motors installed in large doors; in addition, it is essential to enable the doors to be locked with reversible operators. Different models are available in 230V, 120V and the new 24V version, connected directly to the control unit. The wide operating temperature range from -20°C to +55°C allows its application in a wide variety of situations.

Table of manoeuvres DITEC LCU40H for 1 or 2 motors at 24 Vdc with display programming.

The boards of the Ditec LCU series make it possible to easily configure, by means of the display, the operating modes and to control at all times the position and speed of the, allowing regulation of acceleration, deceleration and start time, deceleration space and approach speed in opening and closing. Thanks to the additional plug-in cards it is possible and

Electronic plate FORSA/SEA "SLIDE DG" with digital programming for sliding or swinging 230Vac doors.

It's a four-channel PC

Other, of circular cross-section BFT WE PUT A400 AND A600.

Table of manoeuvres Aprimatic T240 for 1 motor at 230V, intended for use in ONDA sliding motors.

Electronic plate CAME & MOTOSTAR XS100.

Readers Magnetic motor racing finish V2 Gold one piece.

Unlocking Nice WINGO thumping engines.

Receiver 12/24V 433 MHz 1 channel.

This is a 24V Medva PL1000 sliding motor control panel.

Attention the replacement is supplied without the box/casing. Only electronics are supplied.

I'm not going to tell you what to do with a built-in 433.92 MHz manoeuvre frame compatible with VARIO controls.

The electronic plate has a socket to add a 6-pin receiver card externally.

Clutch for sliding motor Pujol Mini Marathon 400KG 24V. It's the only thing I can think of. Compatible with the new Mini Marathon Pro series.

Parts of motor sections Erreka LET'S GO.

To request the price of the spare parts you must contact us by WhatsApp at "644 875 002" or e-mail "commercialtecnoparking.com".

Other trailers and semi-trailerswith a lifting capacity of 400N (40KG). It incorporates a receiver compatible with VARIO4 transmitters.

Fork and Rotula Motor Battery Erreka VULCAN.

Vibrating engine unlock key DEA for MAC and LOOK (5 units)

KIT Strap BFT ARGO T2.5 - 245 - 98 teeth (2 UNITS)

Longitude 4mm.

Control panel BFT THALIA BT A80 DUO for 1 or 2 operators of 24V for cancellations in high complexity systems.

SOMMER 11515V407 electronic plate for SPRINT & DUO motor. FM frequency 868 MHz.

Sliding wheel FAAC A100/A1000 SLIDING GEAR ASSEMBLY.

Electronic plate ROGER H70/104AC is compatible with Roger Technology brand sliding engines that work at 230V AC and be monophase asynchronous. This control center is designed to automate sliding and tilting doors, and is integrated into several brand engine models

Hydraulic oil for motors battens Forsa.

Traffic light receiver card for garage manoeuvres Erreka.

Universal multi-frequency receiver, powered at 12/24V ac/dc for fixed and evolutionary codes 433,92 MHz and 868 MHz on AM and FM frequencies.

KIT engines Nice WINGO 24V electromechanical for two-bladed swing doors up to 2 m per sheet (model 4024) and up to 3,5 m per sheet (model 5024).

Control panel CLAS 1 for rolling stock and 230V blinds. What. Maximum operating power 750W. Programming by pulse.

It shall be capable of operating at a speed exceeding 100 km/h" designed to automate garage and commercial blinds a diameter of not more than 30 mm, and with a for use in the manufacture of motor vehicles.

The Bi-Motor has an electro-brake system to block the blind, and a knob to unplug it so that it can be opened manually in the event of a power cut. Automation is designed to work with with pulleys of 240/280 mm.

KIT Motor NICE model SPINKIT 650N for sectional doors up to 8,8m2 and tilting doors up to 9,8m2. What. Leash traction.

The version in KIT comes with pre-assembled guide of 3m SPIN11KCE.

THE NICE SPIN ENGINE HAS BEEN REPLACED BY THE NEW MODEL NICE SPIDO600 WITH IMPROVEMENTS OVER THIS MODEL

KIT engine Motorline SLIDE1024 to 24V with oil and grease lubricated reducer for sliding doors up to 1,000kg heavy duty and IP44 protection.

FAAC XR2 868 C external bi-channel receiver / 4 channels at 868 MHz. What. External receiver (system with decoder integrated in a custom case for external use).

Compatible with controls XT-2 and XT-4 which you will find under "Product Accessories".

This is the ENTREMATIC ZEN4 garage door, Rollingcode at 433.92 MHz with 4 channels.

The ZEN4 model replaces the old model DITEC GOAL FOUR.

Hydraulic operator Aprimatic TWENTY 270 for swinging canes one or two leaves, semi-intensive use. Speed deceleration closing. Built-in anti-crush safety valves. Quick emergency release. Useful length of stem 270 mm. Stem diameter is 16 mm.

Decoder Nice MORX for 1 ETP or up to 4 EDS/EDSI connected in parallel, with 1 BM1000 memory for 255 combinations.

External unlocking for the tilting engine Erreka ORION to start the engine in the event of a power failure.

Plug-in receiver card CAME reference AF43S for fixed code 433,92 MHz, compatible with the command TOP-432EE & TOP-434EE.

Receiver Erreka IRIN4B 4 relays for fixed code or rolling code (variable) at 433,92 or 868 MHz. Compatible with controls Erreka Moon, Kuma and Iris.

Motor kit CAME BXV10AGS at 24 V for sliding doors up to 1000 kg both residential and communal.

Table of manoeuvres DEA 124RRZ for sectional engines SPACE 703S, digital to 24V DC (without box), ideal for use as a spare.

Engine Forsa Electromechanical ERG 24V for revolving doors of a thickness of residential use up to 10m2. What. With encoder and end-of-course micro-switches on opening and closing. Unlocking by lever, maneuver board, anti-crush system, courtesy light and unlocking in case of power failure.

Sliding engine Motorline Manufacture from materials of any heading, except that of the product very heavy.

Developed and produced in Portugal, STARK is available in 3 versions, 4000Kg, 6000Kg and 8000Kg at 230Vac or 400Vac. What. More compact and modern, it also has quality mechanics, making it an elegant and reliable engine.