Tube motor Erreka SINE Ø35 AND Ø45 for household blinds, curtains and awnings up to 118 kg.

This complete range is completed by up to four different references for domestic blinds, roll-over curtains and awnings. For octagonal tubes from 40 mm to 60 mm, end-of-course system with variable path adjustment and low noise level, with accessories for installation.

Safety photocell Pujol PASEGU0820 12/24V transmitter-receiver with a range of up to 15 metres.

Electronic plate Oxygen CIRCE 230V for residential sliding doors.

Issuers V2 PROTEO for tubular motors for domestic blinds and awnings.

Table of manoeuvres Erreka RINO Inverter is 230V.

Wired stand-alone keyboard Motorline TEC100 with built-in RFID system.

Designed to operate autonomously as a security measure, or connected to the MCA01/02/04 access control unit. Ideal for any type of access, whether commercial, industrial or residential.

The module Nice BiDi-WiFi is a pocket programming interface which ensures a simple and complete configuration of the automatic systems Nice Gate and Door through the MyNice Pro app, making installation setup procedures simple and efficient.

Pocket tools, which must be carried at all times to facilitate configuration of the automatic systems Nice: all phases of programming the automatic systems can also be done comfortably from your vehicle.

Side pin for iron swing doors.

Key to unlock engines Motorline.

Engine Nice SPIDER 800 for sectional doors up to 11.4m2 or for a sheet of up to 12,6m2.

Equipped with integrated central and bidirectional receiver. System Wi-Fi with the device "BiDi WiFi" able to control automatism through the MyNice application, compatible with Android and iPhone.

SPIDER can also be integrated into the dometic ecosystem Yubii for use with devices Nice or third parties. The control will be done with the Yubii application along with other devices that have integrated into the ecosystem.

TAG or marine electronic proximity ring 13,56 MHz.

Compatible with the reader "LPROX-MF".

Hydraulic oil for SEA engines packed in 1 liter, designed to cool the coil of the sliding engines.

Table of manoeuvres AERF SIMPLY with built-in receiver for 1 230V motor designed to drive centre axle rollers with a maximum power of 736W and planned for the end of the race.

Open source built-in receiver the keeloq type at 433,92 MHz (SIMPLY 1H4) or 868 MHz (SIMPLY 1H8).

Receiver AERF "SRM 1L4255" for outdoor use 12/24V with 1 channel, rolling code 433.92 MHz.

Bi-Motor (doble bobina) ACM para puertas enrollables 60/280 con electrofreno. Motor para puertas enrollables industriales compensadas por muelles, eje de 60 mm de diámetro, capacidad de elevanción de hasta 280 kg.

KIT engine Clemsa "AB10BC' electromechanical 230V for residential counterweighted tilting doors up to 10m2.

The actuator has the manoeuvre chart CLAS107 incorporated, irreversible locking system with mechanical locking so no locks are required. The manual interior unlocking allows us to actuate the door manually in case of lack of electric current.

The outer receiver Clemsa Mutant code RN44 is the most versatile of the family of Clemsa, and a width of not more than 50 mm, with a power supply of 230 Vac or 12/24 Vac/dc. Frequency 433.92 MHz or 868 MHz.

Motor kit CAME BXV06AGS at 24V for sliding doors up to 600 kg both residential and communal.

Garage crew Telcoma EDGE two channel rolling code 433.92 MHz.

Wi-Fi controller for the smartphone operation of automatic systems of the mark Nice. What. It includes domestic blinds, section motors, sliding motors or lights.

Tubular motor CAME MONDRIAN 6 (mechanical without radio) or MONDRIAN R6 (radio mechanic) of Ø 55 mm for Ø 60 mm and Ø 70 mm pipes.

With a Ø 55mm is ideal for installation in any automation of awnings, blinds, screens. being used for different tubes such as Ø 60mm and Ø 70mm round or also octagonal (possibility of use on other types of pipes and diameters), incorporates a universal head for the application of any mechanical manual stop and fixing plate with progressive screw adjustment.

Sectional motor guide DEA TEO 700 in steel and chain length 3300 mm (divided into two 1500 mm pieces).

Other, of circular cross-section V2 SENSIVA synchronized and oriented 30o.

Receiver FAAC RP 868 SLF plugged in, fast-coupling (compatible with all electronic devices FAAC of a kind used in motor vehicles 5 pin rapid coupling, or external utility by connecting to the interface of the accessory RP relay).

KIT Electromechanical engine V2 "ATRIS 1000' Irreversible 24 V for sectional and tilting doors of up to 15m2, with a starting force of 1000 N (100 kg).

Piston assembly hydraulic lock for unlocking the hydraulic motor Erreka OTHER. What. Includes a 1-meter whip.

DOOYA transmitter 1 channel 433,92 MHz for tubular motors for household blinds (with fan function).

It incorporates a magnetic base to attach the controller to the wall.

2 channel remote control Dorcas model K43 for opening a receiver Dorcas K4.

Pair of photocells Allmatic FTALL7 (TX / RX), at modulated infrared, range up to 25 metres, with a new and refined circuit designed to ensure maximum immunity to external disturbances and interference. Integrated synchronous circuit.

Motorline M1805 is a compact automatic for swinging pedestrian doors up to 120 kg with the possibility of application on all types of doors of wood, iron and glass, by applying the appropriate accessory.

Two models availableM1805 and M1805 ECO

The automation M1805 ECO differs from the other model by being more economical, as it cannot be installed on evacuation routes. (See comparative table)

The electronics are ready for emergency batteries, radars, security photocells and electric lock.

Allow me for use as a panic alarm door (model M1805), in which when forced the door opens immediately.

Saxo electric motor DEA 902 LIGHT.

Rechargeable battery CR2032 of 3.6V 180o to replace BMW.

This is the second generation of the MINGARDI MICRO 02 KIT 230V.

Chain actuator on top with hinged windows and sash windows.

Replacement rear fork Clemsa A300/400.

Electronic card 780 D for sliding motor FAAC 746 and 844.

Hose cable 8 threads + screen (Erreka).

Quick support Erreka SENA-C for compact drawer.

Electromechanical engine DEA "LIVI 902 SR' 230V for semi-intensive residential tilting doors up to 9 m2 with built-in analogue box-receiver.

The engine incorporates mechanical opening-closing stroke ends for more precise adjustment.

Plug-in receiver card1 channel, with a capacity of 400 codes or 1000 codes, for plugging into manoeuvring frames with standard 4-pin connection, specially designed for CLEMSA frames. The encoding of the memory card is done with the PC-Copy duplicator.

Motor gearbox FAAC D1000 / GENIUS ZODIAC 100 / CLEMSA AS60-120

Garage crew CAME model TOP-434EE with 4 channels, fixed code at 433.92 MHz with self-learning recording system with a pre-programmed control on the receiver.

Other, of circular cross-section CAME MONDRIAN 4

Box battery 24V Nice PSY24 with control circuit and transport handle, intended for use with the Solar Solemyo KIT.

Hit the chain DEA simple 1/2 times 1/8.

12mm resistant safety band kit.

The band is prepared to be mounted directly into the installation wirelessly through a RadioBand.

The MT-23 is a receiver that is automatically tuned to remote control frequency without the need to select the frequency by dip-switch.

It works with fixed and evolutionary code commands simultaneously.

The receiver is tuned to a single Frequency.

Hydraulic motor Erreka 230Vac ATLAS for residential or community intensive use for doors up to 15 m2 with an obstacle detection system. Available in reversible or irreversible versions and with anti-lock system.

Hydraulic motor HYDOM 4LR Semi-Intensive for swing doors for residential use up to 3.5 metres per blade. What. The actuators are powered at 230V and have 250mm stroke, hydraulic damping in opening and closing, available version without lock and with double lock.