Chain coupling DEA SPACE or also called fishbone. What. It is ideal for use as a replacement for the chain linking part in the SPAZIO model's sectional and tilting motors.

MC200 is an electronics switchboard enabling the control and operation of a motor for the automation of a blind, or a sliding door, or a sectional door, or a curtain, or other similar applications.

Compatible with the IT4WIFI module to be able to open and close via a mobile device (Android or iOS) thanks to the built-in WiFi connectivity.

Table of manoeuvres Erreka EPEB AND EPEB-PAL for use in the manufacture of motor vehicles analogue to encoding.

Transmitter FAAC TM XT1 433MHZ one channel for tubing motors for household blinds.

Garage crew PPA the frequency range of the radio spectrum shall be as follows:.

This is the ENTREMATIC ZEN2 model, Rollingcode at 433.92 MHz from 2 channels.

The ZEN2 model replaces the old model DITEC GOAL FOUR.

Blister of the brand GP. What. This is a 3V CR1616 lithium battery.

Roof motor Motorline ROSSO EVO 1200N for sectional doors up to 18m2. What. It has a modern and innovative design, standing out in any environment.

Electric brake or complete clutch for retractable motor ACM The Titan.

Outer receiver V2 model WALLY of 1, 2 or 4 channels at 433,92 MHz or 868 MHz.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

Lamps and lighting fittings Erreka LUMI multi voltage with antenna 433 MHz, used to warn of movement of motorised automatic doors.

Wall transmitter CAME VIVALDI TX1 for internal shutters, stencils and awnings of the KLT series.

The transmitter is wireless powered by a 3V stack, and has a base which can be screwed to the wall.

Operating table or replacement electronic plate DEA model of the vehicle for sectional motors DEA SPACE 702S of 24 V.

In the case of vehicles of categories M1 and N2 for a single leaf and for running ones.

6Garage issuer ROPER MR-2 with 2 channels at 868 MHz.

The new emitter can be activated with a previously memorized control or by recording it directly on the receiver button.

Electromechanical engine Forsa BAT 400 at 230 V for use with hinged doors residential up to 2,5 metres or 250 kg.

Change of maneuver board TMP of a kind used in motor vehicles Sprint Low 400 kg and 600/800 kg. With built-in and external receiver.

Electronic plate or manoeuvre chart Pujol Mini Marathon 400KG with built-in receiver 433.92 MHz for the VARIO series controls.

LINEAR

A pair of outdoor orientable photocells with synchronisation capability. Range 20m Measures 40xh125x46mm

LINEAR/B

Pair of steerable photocells with battery-powered emitter. Range 7/15m Measures: 40xh125x46mm

Blister of the brand GP. What. This is a 3V CR1620 lithium battery.

Magnetic contact lock Clemsa CK20 coded for of a kind used in motor vehicles.

Electromechanical operator Clemsa AS60 (600N) or AS120 (1000N) for sectional doors up to 15m2 with built-in frame. Optimized installation times thanks to its patented three-step assembly. Courtesy light built in.

The KIT consists of a 230Vac electromechanical actuator with built-in box, RNE248U receiver and 2 NT2S emitters at 433 MHz.

The guide can be chosen at the choice of the customer according to their needs in our deployable.

Electric locks Motorline EF30 with button and bulb, and automatic operation providing greater security to the door.

Universal LED flashing lamp, compatible with all types of power plants. Power supply at 230Vac / 24Vac/dc / 12Vac/dc

Aluminium surface key selector Erreka "SESU' with 2 contacts N.O. and a cylinder of europerphyl.

PUJOL model WINNER PRO 600/200 designed to automate rolling shutters for garages and commercial premises, with lifting capacity up to 170 kg.

The WINNER PRO engine incorporates electro brakeor and is designed for 48/60mm axles and 200/220mm pulleys.

The batting motor Erreka CALYPSO is an innovative and reliable solution designed to automate swing doors efficiently and safely. This engine combines advanced technology, robust design and silent operation, ideal for residential and commercial applications.

The CALYPSO motor for swing doors with a maximum length of 3 m is specially designed for residential use doors. With that blade length, the engine is able to move up to 300 KG.

Garage crew Clemsa Mutan-II model NT 2 of 2 channels at 433,92 MHz. What. The new generation of Mutan-II transmitters offers you an uncopyable, double-encryption system. It's also compatible with Mutan and old receivers.

" The issuer NT2 has been replaced by the model N2S OF THE SAME CHARACTERISTICS "

Motor centre axle NF-EMBA SERIES for use in the manufacture of products falling within heading 8528 [1], ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

OXYGEN EOS200EB center axle winding motor for Persiana Winding up to 180KG.

The lifting capacity is up to 180 KG and is designed for 48/60mm axles and 200/220mm pulleys.

Moulded moulds for sliding doors

Motor centre axle ACM of a kind used in motor vehicles, ideal for powering commercial doors or private garages.

The electro-brake brakes the blind once it's closed and avoiding opening it manually. The motor includes the auto brake unlock (black cable), to be able to activate the blind in case of lack of electric current in the room or garage.

Garage crew MEDVA model of the vehicle with 3-channel RollingCode coding at 433.92 MHz.

The forklift has two mach connectorsor to connect two 6-pin plug-in receiver cards, ideal for parallel installation while maintaining the existing receiver card.

The bifurcator is compatible with manoeuvring frames having a 6-pin socket: JCM, AERF, EREKA, among others.

Elemat model TEC-2 mini type GO RollingCode transmitter at 868 MHz.

Receiver Motorline model M175 to control your automatic door remotely through your Smartphone gSM via 3G with telephone call, SMS or by Bluetooh technology via the Android or iOS application.

It has two independent outputs for automation control and two outputs for receiving information on the state of the door (open or closed).

It allows the configuration of up to 509 users, with the possibility of importing the excel list through the Android application.

It allows the recording of the history of confirmed and rejected accesses via an external memory card.

" THIS PRODUCT HAS BEEN DISCONTINUED AND REPLACED BY THE NEW MODEL M200 "

Hydraulic motor HYDOM MINIMAX for semi-intensive use for oversized two-bladed hinged doors (maximum 14m2). Allows manual opening and closing in the event of a power failure.

Maintenance on this engine is practically zero.

Electrical lock ERREKA LV9083 VIRO with outside pump, a width of not more than 50 mm. This is a 60mm Long Gun. Horizontal or vertical mounting.

Transponder SUPERCHIP to the xHorse MINI VVDI Key Tool's machine. This is the key.

Universal ceramic chip all in one that clones ID46, 4D, 4C, ID48 and 8C.

Blister of the brand GP. What. This is a 3V CR2025 lithium battery.

THE KIT Electromechanical engine Erreka ORION 230Vac for swing doors for use in the manufacture of products falling within heading 8528 [1] encode or end run. What. Can be used with inside opening or outside opening.

The TSM 2 U traffic light control module is a device for regulating the passage of vehicles through traffic lights.

It is indicated for the passage control in garages with entrance and exit by the same door, two-way parking ramps, accesses to businesses by two-way barriers and all situations where it is necessary to regulate the passage of vehicles through a single point through traffic lights.

Manufacture from materials of any heading Erreka IZAR for tilting engine.

Universal RX2DUAL universal receiver capable of automatically storing different emitters regardless of code type or frequency being compatible with fixed and evolutionary code commands at 433 or 868 MHz.

The RX2DUAL receiver allows us to memorize different marks simultaneously provided it has the frequency 433 MHz or 868 MHz.

Linear hydraulic motor Erreka VULCAN for swing doors residential, community and industrial with a maximum blade length of 6 metres.

Full range: reversible and locked actuators, with for use in the manufacture of motor vehicles.

Other, of polymers of vinyl chloridewith their corresponding housings for residential or industrial sliding motors.

Motor for sliding doors Hy-Dom for heavy duty at 230v. What. It incorporates an angle reader (encoder) and an anti-crushing system at opening and closing, a manual assistance manoeuvre activation system, and detection in case of untimely closure of the door by a gust of wind.