KIT's 230Vac CICLON articulated arm motors Erreka for swing doors up to 3.5m and 250 kg per leaf, ideal for motorizing residential doors where we have small spaces or wide pillars.

CHARACTERISTICS

• Easy self-learning of door paths, gaps, and slowdown speeds.
• Practical engine release system with custom key.
• Ideal solution for very tight spaces and doors with wide pillars.
• Obstacle detection for safety.
• Possibility of anti-entrapment system by encoder.
• High degree of protection against water and dirt.
• Very powerful engine.

The CICLON articulated arm motor is designed for residential swing doors with a length of up to 3.5 m per leaf and a weight of 250 kg.

It is a 230Vac motor available in encoder and non-encoder models with obstacle detection safety and electronic soft stop.

SPECIFICATIONS

• 230Vac power supply.
• Force 220- 500Nm.
• Locking and non-locking versions.
• Maximum aperture 130º.
• Versions with/without encoder.
• IP44 degree of protection.
• NO end-of-career.
• High usage.
• Easy installation with both articulated arm and slides.
• Possibility of mounting stops on the sliding arm.
• Usable in all temperatures between -20/+60.

* The use of the electric lock is mandatory on non-locked models and on locked models when the length of the leaves is greater than 1.80m.

* With CL210, CL21OF and CLS210F engines, maximum weight of 400kg for doors up to 1.5m.

* With CL250, CL250F and CLS250F engines, maximum weight of 600kg for doors up to 1.5m.

KIT CICLON63 CONTAINS

• 2pc CL210: Electromechanical arm motor, 220 Nm, reversible.
• 2pc ACL06: Sliding arm for 220Nm motor.
• 1 pc VIVO-M201: Analogue control panel for 1 or 2 230Vac motors.
• 1 pc IRRE2: FixCode 433 MHz plug-in receiver card.
• 2 pc KU02: FixCode KUMA transmitter 2 channels 433 MHz.
• 1pc FT06: Pair of transmitter-receiver safety photocells.

KIT CICLON10 CONTAINS

• 2pc CL210F: Electromechanical arm motor, 220 Nm, locked.
• 2pc ACL06: Sliding arm for 220Nm motor.
• 1 pc VIVO-M204: Digital control panel for 1 or 2 230Vac motors. Brake management card.
• 1 pc IRRE2: FixCode 433 MHz plug-in receiver card.
• 2 pc KU02: FixCode KUMA transmitter 2 channels 433 MHz.
• 1pc FT06: Pair of transmitter-receiver safety photocells.

KIT CICLON65 CONTAINS

• 2pcs CLS250F: Electromechanical arm motor with encoder, 500 Nm, locked.
• 2pc ACL06: Sliding arm for 220Nm motor.
• 1 pc VIVO-M202: Analogue control panel for 1 or 2 230Vac motors. Brake management card.
• 1 pc IRRE2: FixCode 433 MHz plug-in receiver card.
• 2 pc KU02: FixCode KUMA transmitter 2 channels 433 MHz.
• 1pc FT06: Pair of transmitter-receiver safety photocells.

KIT CICLON7 CONTAINS

• 2pcs CLS210F: Electromechanical arm motor with encoder, 220 Nm, locked.
• 2pc ACL06: Sliding arm for 220Nm motor.
• 1 pc VIVO-M204: Digital control panel for 1 or 2 230Vac motors. Brake management card.
• 1 pc IRRE2: FixCode 433 MHz plug-in receiver card.
• 2 pc KU02: FixCode KUMA transmitter 2 channels 433 MHz.
• 1pc FT06: Pair of transmitter-receiver safety photocells.

MANUAL

Technical data sheet Erreka Cyclone

Cyclone Erreka Installation Guide

Instruction manual Erreka Cyclone

ERREKA CICLON INSTALLATION VIDEO