Interface for connecting the O-View programming unit.

Engine DEA MAC electromechanical version 230V and 24V for residential sliding doors up to 3 m per sheet.

Engine Nice SPINBUSKIT BD 24V 650N with magnetic encoder and two-way emitter, for sectional doors up to 10,5 m2, and for hinged doors up to 11,8 m.

Receiver kit Nice long range OXILR with two-way emitters and a universal adapter for frames from other manufacturers.

Electric brake Clemsa EF81 for rolling stock AR2581, allows us to block the blinds once closed. Emergency unlocking can be done with the handle on the mechanism.

Garage crew Forsa Alpha mini with 2 channels with RollingCode coding system at 868 MHz.

This emitter comes with the code Alpha Towers so it won't work in garages where there's a different custom code. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Kit of mini photocells with switch and stands of application for KAPV automatic doors.

This module photocell set adapts a control technology that offers high integration and stability. Easy to install, this product has lenses with excellent focus quality. It gets a long transmission distance, no interference.

Electromechanical barrier 24 V CAME Gard GT4 heavy duty with aluminium mast in white lacquer of 90x60 with a length of 4220 mm.

Table of manoeuvres Motorline 230Vac MC52 developed to use 2 vibrating motors up to 500W per motor.

The actuator TRIK 24SILENCE 24 of 24Vdc has been designed to cover the market space of rolling doors made of aluminium or stainless steel slabs these doors require a quality actuator to perform silent and rapid manoeuvres with soft stops at the end of the run to avoid hitting the lock.

Garage crew JCM two channel RollingCode at 433 MHz.

The emitter has a stand and keychain.

Pulsed SMD 6x6x4.3mm (10 units)

Issuer AERF Ground C4 with channels 2-6-4-F RollingCode frequency 433.92 MHz.

It allows the use of up to 5 channels using a combination of buttons.

Magnetic loop detector Erreka IBUC (Carlo Gavazzi) What is it in 230Vac of measurements 80x40x79 mm, available for 1 or 2 loops.

Plastic protector for safety photocells, ideal for the MFE model.

Replacement adapter casing pinion shaft V2 THE JEDI.

Final race replacement engines slides BFT.

Set for replacement of end-of-spring racing engines BFT. What. Includes metal blades, spring and end run wiring.

PUJOL armored box with unlocking lever designed to incorporate electrobrake of the rolling motors, it also incorporates an internal switch to operate the automation (up and down).

KIT of 2 24Vac auxiliary batteries with exclusive charger (in a separate box) for direct current slide motors the DINGO range, the NAOS and ZETA tilting/sectional doors, and the NET and OMNI automatic barriers.

Wall support DEA for issuers GTI2 & GTI4 of measure 80x80x15 mm in black and white.

Table of manoeuvres V2 "FLEXY' analogue 230V for sliding and swinging doors.

Micro-switches CAME Sliding ATI (3 pieces)

KIT screws and hydraulic operating joints BFT the ORO & BERMA model.

Sliding doors in zinc or aluminium.

Impulse garage light card Clemsa TG3 for old CLAS manoeuvres.

Column FAAC for photoportable cells with a height of 50 cm.

Key unlocking sliding motor FAAC 746/844.

Nylon/PVP basting doors brushes.

Garage crew Nice MYGO4 monodirectional 433 MHz.

Dented helicoidal motor reducer Nice SPIN with output shaft.

Brushless motor Motorline GALO 36V, no scobillas, super intensive use to motor sliding doors that require access with high vehicle traffic.

High performance and speed 36Vdc engine, for sliding gates up to 2000kg (4 versions available).

The absence of scobillas and the box lubricated gears ensure super-intensive use with high performance.

High speed NICE ROBUS HS sliding motor for fast drive other, of circular cross-section up to 250 kg (RB250HS) and 500 kg (RB500HS), for doors for residential or industrial use.

In the case of vehicles of categories M1 and N2 with a maximum mass exceeding 2000 kg:.

Electric locks Erreka LBO20 to drop 230Vac with inner cylinder.

It is used as a leaf-locking device in automated vibrating shutters. It can only be unlocked from the inside. We don't have a light bulb on the outside.

Rotate front support for HyDom engine Lineal series.

Push head with silentbloc for HyDom linear series vibrating motors.

Electric lock ERREKA LV9083 VIRO with adjustable input of 50-60-70-80 mm. It's got an internal pusher.It's a long shot. Horizontal or vertical mounting.

Go garage command JCM a frequency of 868 MHz with code Doors New Castile.

Plug-in receiver card by 6 pin connection, free code RollingCode at 868 MHz. What. Capacity up to 255 codes.

Compatible with most receiver cards; JCM, Erreka, Pujol, HyDOM, Forsa, Terra, and so on

Transponder ID48 with tocken for cloning machine xHorse VVDI Key Tool's.

Pre-wired aerial receiver Nice 2 channel transmitter compatible Nice it shall be capable of operating at a frequency of 433,92 MHz (FLO, SMILO and ERA INTI).

Casing or Tube of attachment of a kind used in motor vehicles Minimax Hydom.

External unlocking for tilting engine DEA LIVI 902 for opening in the event of a power failure.

Table of manoeuvres DEA 400RR digital three phase 400V AC or single-phase 230V AC (with 100G box or without box) for 1 engine with encoder (Gulliver-Lato).

End of race spare 748 D

Complete kit of engine Motorline, with an innovative and modern design, developed for automation of other, not further worked than hot-rolled, hot-drawn or extruded. What. This engine is irreversible and possesses adjustable running ends at opening and closing. What. Available in 230Vac and 24Vdc.

Central Motorline MC62 developed to work with 1 or 2 24Vdc motors, with a maximum power of 120W each

Central Motorline MCS01 developed to work together with traffic control lights in narrow two-way places, such as entrances and exits of garages, tunnels or bridges.