External receiver BFT "CLONIX 2E AC U-LINK 230' with built-in receiver 433 MHz, compatible with the U-LINK protocol (equipped with 3 connecting slots). The Receiver is powered at 230Vac and has a memory capacity of 2048 users.

Control panel BFT "WALENA SW2' with DIP switch and potentiometers for one or two operators of 230V/400+400W used in hinged and folding industrial doors, with management of a sensitive bar and the possibility of checking security entrances.

It can manage the deceleration of the gate in both the opening and closing phases. You can also manage the connection with an EBP electric lock or an ECB (with an additional ME card).

The radio receiver has been incorporated with variable code technology. What. The swing doors are colourful and removable to manage the cables with greater agility.

Articulated motor BFT "VIRGO SMART BT A' residential hinged doors up to 2 metres or up to 200 kg. The main actuator incorporates a manoeuvre box with a 433 MHz receiver.

Residential electromechanical articulated-arm operator for swinging cantilever blades up to 2 m and up to 200 kg. Ideal for any installation requirement, allows you to easily solve problems related to large pillars thanks to the lever system. What. Control unit, control switch and mechanical stop blocks integrated in the operator.

Emergency battery kit BFT "VIRGO THE BAT".

Electromechanical axle traction operator BFT "PEGASO' for semi-intensive or intensive use to automate industrial sectional doors of 20m2 to 45m2.

Mechanical lock and end of run of absolute encoder with possibility of rapid ground regulation.

Table of manoeuvres BFT "LEO B CBB L01' for single phase PEGASO sectional operators.

Replacement axle with pinion or gear reducer for Erreka IZAR, compatible with models IZ4C and IZS4.

Motor head PUJOL "SPIDER PLUS" with built-in frame for sectional doors.

It doesn't include the Guide or Controls.

SPLIDER PLUS is a 24V operator for sectional garage doors with a tensile strength of 60 KG to 125 KG and heavy use. Area of the door max 16 m2. Opening speed 240 mm/sec.

Integrated batteries 'BAT 3' for BFT Botticelli BT A for emergency manoeuvres. What. They allow up to two manoeuvres.

Maximum duration of 12 hours in standby mode in case of prolonged outage.

Electronic plate BFT "VENERE M B GDA' ideal for use as a replacement for the operator TIZIANO B GDA IT 'S 24V .

Electronic plate BFT "VENERY BT TO DIS" Operator BOTTICELLI 24V with digital screen.

Single-phase control panel for retractable doors with built-in Winner motor.

Incorporates the radio part compatible with dynamic code emitters (VARIO).

Manoeuvre entrances protected by zener diodes. .What. Power supply and motor protection by fuse 6A. Led network indicator.

LED traffic light Celinsa 2 colours (red-green) adjustable with supports included.

Aluminium column pair BFT for photocells of the THEA, DESME and COMPACTA series. Height 522 mm

OBDII cable for IM508

KIT sliding window for 2 sheets up to 2m2 per sheet Motorline KPORTC85. What. It can be applied to the top or bottom of the window.

Developed for your comfort, this automation makes it possible to open sliding shutters in your home with a simple click of the control button, without opening the windows. Available for 1 or 2 sheet shutters up to 2m2 per sheet.

Garage crew FAAC TM1868DS binary at 868 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Garage crew FAAC TM2868DS binary at 868 MHz.

The encoding of this emitter is done by a combination of 12 dip switches.

Electronic plate Medva QRF H4 24Vdc for 24V sliding motors with emergency battery connection terminals. It has: incorporated receiver RollingCode 433,92 MHz.

Other, of circular cross-section EMFA B45 for electro-mechanical engine ROT MEC.

Outer receiver KINGGATES FRED 2 channels RollingCode is 433 MHz.

" THE FRED MODEL 2 WE'VE GOT HIM OUT. _ FREDDY2 WITH THE CHARACTERISTICS"

High speed motor Aprimatic "FAST WAVE 424" 24V for sliding doors up to 400 kg and 320 mm/s for residential use.

Incorporates the manoeuvre chart, with anti-crushing system to reverse the manoeuvre in case of detection of obstacles. What. Custom key unlock in case of power failure.

The engine is P-1. Designed for revolving doors up to 235 kg weight. What. Suitable for automating locks with side drive and gearbox.

Integrated electronic equipment that allows opening by key, button or remote control. Manual operation by crank.

" This product has been discontinued in 2024 and PUJOL has stopped manufacturing "

Accessory replacement CAME AXIS 88001 TO 0156.

Engine CAME In the case of vehicles of categories N1 and N2 with a maximum mass exceeding 2000 kg: designed to power swing doors up to 10 feet per blade.

Ideal solution for residential and community type enclosure installations.

Endless screw always protected by the dedicated cover.

Not further worked than hot-rolled, hot-drawn or extruded CAME ATI series 88001-0125

Harness Saxo tilting engine FAAC 580

Replacement Motorline KBM6 - Module 3 relays for the management of LED RGB lights

Replacement Motorline KBM6 - RGB board with LEDs.

It's a two-channel PC

KIT Sliding engine Clemsa "AC862N" electromechanical 230 V for residential doors up to 800 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Software engineer Clemsa PT8 for facility management by Software SW8 for the management of Mutan-II and MutanCode systems via Smartphone (Android).

KIT Sliding engine Clemsa "AC424N" electromechanical 24V heavy use for residential doors up to 400 kg. Includes Sprint M24 maneuver board. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Electromechanical barrier Pujol Starline Pro Semi-Intensive with 3m rectangular mast, compact enough to delimit private areas, parking lots and accesses for vehicle use only.

Race finish SPAZIO 703

In the case of vehicles of categories M1 and N2 with a maximum mass not exceeding 2000 kg:

KIT CA HOME kit of two trailing hoods MEDVA HOME to weld on bars.

Garage crew Clemsa model MUTANcode N84 4 channels, rolling code 868 MHz.

This emitter comes with the standard code, so it won't work in garages where an installer has put in a custom code. It is 100% compatible with the receivers and receiver cards of this website Tecnoparking. Activation can be done by the receiver button or remotely by radio with a pre-programmed control.

Sliding engine Clemsa "AC562N" electromechanical 230 V for residential doors up to 500 kg. It incorporates a manoeuvre chart CLAS62C. The actuator has magnetic running ends, levered unlock system, aluminum body painted with polyester powders and ABS crankcase. in addition, thanks to its anti-crush system and smooth stopping we will have an engine with reliability and maximum precision.

Electronic plate "PD14" for use as spare parts in sliding motors V2 OTHER IT 'S 24V .

The PD14 is equipped with a display that allows, in addition to easy programming, the constant visualization of the status of the entries; in addition, the structure with menus allows a simple programming of working times and operating logic.

Unlock leverage BFT WE WENT ULTRA.

Pineapple BFT Z14 with Grupilla compatible with the DEIMOS BT & ULTRA sliding engines.

AB-TALOS anti-vandal keyboard with fully autonomous built-in decoderit works independently.

Table of manoeuvres Clemsa "SPRINT M24' for sliding engine 'AC424N'.

Sliding engine Beninca "BULL10M' 230V for lamps for Community use up to 1000 KG. What. It incorporates central with receiver, encoder and custom unlock key. Available model "BULL10M.S" with magnetic running ends.

Lamps and lighting fittings Beninca "LAMPY" 230V with integrated antenna.

Other, of circular cross-section Beninca ONE.2WI 433,92 MHz of 2 channels with triple coding: Advanced rolling code, rolling code and fixed code.

Ability to memorize up to 512 codes. Learning the coding after the first transmission with the transmitter.

Motor gearbox replacement Motorline RED EVO.