Superman is a universal command of Xhorse with 3 MQB type buttons and multifunction with built-in SUPERCHIP which clones ID46, 4D, 4C, ID48 and 8C.

It does not include sword so it must be included according to the command to generate or clone.

This is the second generation of the MINGARDI MICRO 02 KIT 230V.

Chain actuator on top with hinged windows and sash windows.

OXYGEN SARGON 230 V electromechanical motor for residential sliding doors up to 3 m in length per sheet.

The engines of the SARGON series have a 300 mm stem and are designed for use in lightweight doors up to 250 kg.

NICE ROA37 manoeuvre chart for sliding engine THOR 1500, incorporating a receiver with RollingCode 433,92 MHzcompatible with FLOR and SMILO emitters. The programming is analog using micro dip switches.

Electromechanical motor 230 V ERREKA DELFOS for residential and industrial revolving doors with a lifting capacity of 170 to 360 kg, for tubes with shafts of 48 mm, 60 mm and 76 mm.

LED signalling lamp V2 BLINKO multi voltage from 24 to 230 V.

Triangular unlock key FAAC.

Unlock key V2 It's called Calypso.

Unlocking lock assembly PZ.38 for sliding engine TMP Sprint low. Includes two keys.

KIT Electromechanical engines V2 CALYPSO irreversible at 230 V for 2 residential swing doors for leaves up to 2,5 metres.

The KIT includes:: digital or analogue control panel for 2 motors at 230 V, with plug-in receiver and 2 bi-channel emitters at 433 MHz

Engine axle traction Motorline ROLLING for retractable doors, robust and easy to install for retractable bars, with electro brake for shutter locking.

Electromechanical motor BENINCA AU96 for residential use up to 12m2.

Wall support DEA for issuers GTI2 & GTI4 of measure 80x80x15 mm in black and white.

Table of manoeuvres V2 "FLEXY' analogue 230V for sliding and swinging doors.

JAG engine of Motorline electrical engineer for use in the manufacture of products falling within heading 8528 [1] up to 4 metres/leaf (JAG400) and for doors up to 6 m/sheet (JAG600). Irreversible motor incorporating electric running ends in opening and closing.

A torus transformer Pujol Marathon DC 700KG a voltage of not more than 80 V.

Garage crew LIFE FIDO RollingCode 433.92 MHz with two channels.

Light crown of red/green LED barrier lights CAME Gard GT4.

Other, of circular cross-section Forsa THIS IS UNIKO EVOLUTION.

Hydraulic oil Aprimatic AF32 (APRIMOIL) of 1 litre for reciprocating or hydraulic motors.

PUJOL MARATHON PRO II and III sliding motor plastic housing. Compatible also with the old models MARATHON and MARATHON DC.

SOMMER APERTO sectional motor "A 550 L" or "A 800 XL" for connectable doors, with separate control unit of the engine, receiver and integrated WiFi module.

Security photocells Prastel FOTO30-B formed by a 12/24V-powered transmitter and receiver are designed for the use of access systems in automatic garage doors with a maximum range of 30m2.

Magnetic lock with metal casing for magnetic keys.

Engine Erreka 24V DINGO designed for light residential sliding doors up to a maximum of 400 kg. Adaptive pinion to fit any type of zipper.

Table of manoeuvres Pujol SENIOR II PRO 230V for two-bladed swing doors, with a receiver for up to 255 users and a built-in antenna.

Engine Pujol Marathon PRO Q III three-phase for sliding doors up to 2000 kg residential, community or industrial. Equipped with electronic board and built-in receiver.

Electromechanical engine Erreka KAIROS at 24 Vdc of a kind used in motor vehicles up to 300 kg or 3 metres per leaf for residential or community use.

JAG engines from Motorline electrical engineer for use in the manufacture of motor vehicles [1] up to 4 metres/leaf (JAG400) and for doors up to 6 m/sheet (JAG600). Irreversible motor incorporating electric running ends in opening and closing.

A one-channel receiver operating in both mono-stable and bi-stable mode, capable of storing up to 500 12-bit or Rolling-Code codes.

It's only compatible with the controls Motorline model FALK and MX4SP.

The kit includes 2 units of the FALK emitter.

Reversible electric lock EC113. What. Adjustable input of 50 to 70 mm. What. Food 12V ac/cc. What. Inner and outer bulb 60 mm.

Electric lock applicable to interior and exterior doors and gates, ideal for folding/sloping doors.

Power supply 230V to 12Vwith a metal housing with integrated surge, surge and short circuit protection.

Control, programming and diagnostics unit for equipment with the BUS T4 connection, in situ or remotely via GPRS through the connection with your PDA, Smartphone or PC.

KIT engine EMFA MTCH of 800 N and 1000 N for residential-intensive sectional doors.

Engine FAAC 412 electromechanical 230 V for hinged doors up to 6 feet, ideal for residential use.

Curved harness Erreka NPTOR for torsion springs and counterweights.

Telescopic masts barriers Motorline KBM6, KBM8 and KBM11

LED traffic light Clemsa two red and green lights or amber with a 120mm lens diameter of 25 LEDs. It is ideal for signalling the passage of vehicles or people.

Basic Control Panel Clemsa CLAS10 for tilting doors. What. Residential use 230V. Maximum power 750W. Programmable opening and closing time from 6’’ to 70’’.

Garage command Emfa MTCH4 channel Rollingcode at 433 MHz for the new Emfa receiver series.

Proximity key V2 VTR of 125 kHz for readers PROKSIMA.

Action 22 x 30 x 5 mm .

Motor reducers DEA OLI/N hydraulic 230V rod 270/400mm for swing doors.

Optimal materials, compact structure and adjustable power allow their use even in continuous working situations. Precision mechanics and the use of hydraulic oil as a motor fluid are the secret to a quiet movement.

Installation is quick and easy and requires no modification of the door structure.

Interface for connecting the O-View programming unit.

Engine DEA MAC electromechanical version 230V and 24V for residential sliding doors up to 3 m per sheet.

Engine Nice SPINBUSKIT BD 24V 650N with magnetic encoder and two-way emitter, for sectional doors up to 10,5 m2, and for hinged doors up to 11,8 m.

Receiver kit Nice long range OXILR with two-way emitters and a universal adapter for frames from other manufacturers.

230V Medva ECO hydraulic motor for residential and community swing doors with a maximum length of 4, 6 and 7 metres depending on the model.

Improvements have been made to the actuator to make it quieter and faster, offering higher opening and closing speeds

Patented adjustable ring system on the stem to adjust opening degrees, adjustable soft stop at closing.

Machinery for making pulp of fibrous cellulosic material, except in the BACN model.

Electric brake Clemsa EF81 for rolling stock AR2581, allows us to block the blinds once closed. Emergency unlocking can be done with the handle on the mechanism.