Parts for sliding motors Erreka RINO 600/1000 kg. The weight of the product.

Transmitter CAME ELVIS 433.92 MHz with 15 white channels.

The 24-bit emitter has 4.194.304 for use in the manufacture of motor vehicles [1], for the radio control of curtains, blinds and retractable systems compatible with the KLT series.

Universal receiver card 433,92 MHz compatible with keeloq type issuers with connector of 6 pins.

Compatible with manoeuvring charts: JCM, AERF, EREKA, PLEASE, among others

Transformer Pujol The Mini Marathon 400 KG.

For the purposes of this Regulation, the following definitions apply:

Box for unlocking the mark Erreka, with two-position selector, surface designed for rolling motors.

Hydom ROTOR-UNIC tilting engine mounts; ■ a complete range of telescopes, torsion bars and saxophone hardware according to the needs of the installation.

NICE M6 30x30x1000 mm galvanized zipper for welding and crown coupling RUA12.

Small size traffic light Erreka LLSD in two colours red/green and powered at 230 V to signal motorised door installations. Coloured lights indicate whether or not it is convenient to go through the door.

Electronic switchboard Motorline MC75 for indoor roller shutter motors and indoor tube shutter motors. What. It incorporates a 433 MHz RollingCode receiver with a capacity of 30 codes.

The TP MULTI V48 controller is a self-copying emitter for fixed and

the evolutionary bands 433.92 MHz and 868 MHz on AM/FM.

Command for the duplication of fixed codes; MasterCode, Binary, Trinary and Multifrequency.

Command for evolutionary code duplication of the Keeloq type: Erreka, Pujol, Dea, Neo JCM, Hydom, BFT, Motorline, Sommer, I'm going to go to the hospital, Clemsa Mutancode, among others

Duplicate of other types of evolution: V2, Nice FLOWER, Aprimatic, FAAC, Ditec among others

* Special prices for professionals. Contact us to open your file.

Issuer AERF Earth C8 with channels 2-8-4-E RollingCode frequency 868 MHz.

It allows the use of up to 5 channels using a combination of buttons.

CISA electric lock for folding or swinging doors. With a European light bulb. Copy keys from hardware stores. Supplied with three keys. Inner button option. Easy to install. The safest on the market. It guarantees closure 100% of the time.

This CISA model electric lock is quite well known in the market for its robustness. It's got a strong metal frame and it's tough as nails. It 's a CISA lock anti-vandalism the only way to get inside is to have the key because the screws are protected when the door is closed.

Receiver AERF "SRM 2H4255' for outdoor use 230Vac with 2 channels, rolling code 433.92 MHz.

Pair of photocells Nice It was PHOTOCELL S with transmitter-receiver operation.

The models EPSB and EPSAB have the BlueBus technology compatible with some Nice which allow the photocell to be connected with only two wires where they will receive power and the safety contact.

Hydraulic motor Medva HB1 for swing doors one or two-bladed counterweights with a not more than 25 m2, for residential, community or industrial use.

Engine Pujol Marathon DC at 24V with M4 pin for sliding doors up to 700 kg for residential, community or industrial doors.

Hydraulic oil of the brand BFT for tilting and swinging motors. Pack size of 2 litres.

Motor head PUJOL STC for sectional doors up to 10 m2 and 60 kg (STC600), or up to 15 m2 and 100 kg (STC1000) sectional doors. Built-in receiver maneuver board compatible with VARIO emitters.

Issuer Nice It was Inti model "INTI2" of 2 channels at 433.92 MHz in black.

Plug-in receiver card1 channel, with a capacity of 400 codes or 1,000 codes, to be plugged into manoeuvring frames with standard 6-pin connection. The encoding of the memory card is done with the PC-Copy duplicator.

For the purposes of this Regulation, the following definitions shall apply: Motorline MB2 coded approach.

Other, of circular cross-section V2 THE JEDI.

Analogue chart Erreka CLEVER01 230Vac for rolling shutters, with outlet power for peripherals 24Vac and programmable auto-lock settings.

The CLEVER01 manoeuvring frames are designed to be part of rolling door automation systems, driven by a single-phase motor with permanent condenser. The actuator shall have running ends.

Safety photocell Erreka FT08 with mirror.

FT08 photocells are designed to detect obstacles in automatic door and gate installations, preventing the door from colliding with them.

They consist of a transmitter-receiver module and a mirror. The module emits an infrared beam which is reflected in the mirror and returned to the module.

If the beam does not return to the module, the contacts of terminals 1 and 2 change state.

The unlock safe Nice KIOMINI is an aluminum cabinet mainly for commercial roller shutter motors, and their function is to unlock the electrobrake of the rolling motor for manual operation in the event of a power failure. It also includes a button for automatic actuation of the automation.

Safety photocell DEA LINEAR/XS the transmitter-receiver format.

A pair of small, synchronizable outdoor photocells. Maximum range of 20m92x38mm).

Replacement plate V2 PD13 for ALFARISS sliding engines, with programming display.

Replacement electronic plate CAME WHAT'S UP.

Compatible with older ZBX7 and ZBX 74-78 boards

Triangular NICE unlock key for engines of the ROAD, ROBUS and TOO series.

Motor head Nice SPIN SN6021 650N for sectional doors up to 10,5 m2 con embedded table SNA20.

Important: The Guide is not included.

Engine Erreka 24V DINGO designed for light residential sliding doors up to a maximum of 400 kg. Adaptive pinion to fit any type of zipper.

Adjustable photocell with battery (from 0 to 210o) 12-24V The FT04 photocell (TX + RX) is specially designed for the industrial and private door market. The sensor complies with the regulations for motor doors in Europe. Its shape makes it easy to mount on the wall.

Plug-in receiver card Clemsa Mutated for 400 users, of 2 channels at 433,92 MHz and 868 MHz on the same receiver. Compatible with the Mutan and Mutan-II emitters.

External unlocking for spring and sectional hinged doors (ROSSO EVO).

Pair of safety photocells Nice EPM for indoor or outdoor use, with a maximum range of 15 meters. The power supply of the EPM photocell is 24V and incorporates IP44 protection.

HYDOM QMB2 manoeuvre box for 1 motor to 230V, with force regulation and soft stop at the end of the opening and closing manoeuvres, the ease of programming and the luminous indicators in the control inputs makes it very versatile and practical for most automatisms.

The center includes inputs for end of race, electrolocking, garage light, photocells and segurine bandsd.

New 600N NICE SPIDO engine with integrated central and receiver. For sectional doors up to 9.6 m2 and tiles up to 10.5 m2.

Remote control with the MyNice Welcome app Nice Core Wifi gateway to manage all your automatisms.

Parachutes for iron tilting doors of the flat type and UPN.

Issuer Clemsa Mutan-II Long range model NT LR with 2 channels, a Rollingcode 868 MHz system with an elegant and minimalist design.

Engine Nice SHEL75 of 750N at 24Vdc for doors other, of circular cross-section and doors other, of circular cross-section (of 1 sheet), with pre-assembled guide in one piece of 2,850 mm. What. Includes receiver (built-in) and 2 NICE FLO4RCE controls.

Machinery for making pulp of fibrous cellulosic material, where one of the doors shall be fixed so that it is blocked by the top of the ground bolt.

Wi-Fi module to control from anywhere and in a simple way, all automated devices MOTORS, TOLDOS, LIGHTS, by means of the ART range of CAME.

Small module for opening garage door by a short burst of light, compatible with both cars and motorcycles.

The module has a jumper to select the voltage input as either positive or negative. Normally when it comes to halogen light it sends the voltage as positive, and for LED light it sends the voltage as negative.

Support CAME CHANTIER Ø45mm for compact box for tubular motors MONDRIAN 5.

Sliding motor integrated electronic plate Erreka DINGO, WHAT ARE YOU DOING.

Sliding engine unlocking lever assembly FAAC 740-741 with their respective screws and 1 saw key.

Magnetic ground spindle Motorline MD150 for vehicle detection and automatic opening of barriers or doors.

The ground magnetic spiral is useful for accurately detecting the presence of metal objects, such as cars and trucks, even when vehicles are not in motion.

Emissor FAAC 2-channel XT2 SLH and 868 MHz frequency.

The programming or memorization of the new Emissor must be carried out by proximity or confrontation from an original command in operation.

* Special prices for professionals. Contact us to open your file.