Plug-in receiver card1 channel, with a capacity of 400 codes or 1,000 codes, to be plugged into manoeuvring frames with standard 6-pin connection. The encoding of the memory card is done with the PC-Copy duplicator.

The unlock safe Nice KIOMINI is an aluminum cabinet mainly for commercial roller shutter motors, and their function is to unlock the electrobrake of the rolling motor for manual operation in the event of a power failure. It also includes a button for automatic actuation of the automation.

HYDOM QMB2 manoeuvre box for 1 motor to 230V, with force regulation and soft stop at the end of the opening and closing manoeuvres, the ease of programming and the luminous indicators in the control inputs makes it very versatile and practical for most automatisms.

The center includes inputs for end of race, electrolocking, garage light, photocells and segurine bandsd.

Replacement plate V2 PD13 for ALFARISS sliding engines, with programming display.

For the purposes of this Regulation, the following definitions shall apply: Motorline MB2 coded approach.

Analogue chart Erreka CLEVER01 230Vac for rolling shutters, with outlet power for peripherals 24Vac and programmable auto-lock settings.

The CLEVER01 manoeuvring frames are designed to be part of rolling door automation systems, driven by a single-phase motor with permanent condenser. The actuator shall have running ends.

Safety photocell Erreka FT08 with mirror.

FT08 photocells are designed to detect obstacles in automatic door and gate installations, preventing the door from colliding with them.

They consist of a transmitter-receiver module and a mirror. The module emits an infrared beam which is reflected in the mirror and returned to the module.

If the beam does not return to the module, the contacts of terminals 1 and 2 change state.

This is a universal receptor, wired and powered at 12/24V up to 400 users with 2 channels a frequency 433,92 MHz or 868 MHz.

Pair of safety photocells Nice EPM for indoor or outdoor use, with a maximum range of 15 meters. The power supply of the EPM photocell is 24V and incorporates IP44 protection.

Safety photocell DEA LINEAR/XS the transmitter-receiver format.

A pair of small, synchronizable outdoor photocells. Maximum range of 20m92x38mm).

Sliding motor integrated electronic plate Erreka DINGO, WHAT ARE YOU DOING.

Replacement electronic plate CAME WHAT'S UP.

Compatible with older ZBX7 and ZBX 74-78 boards

The MC50 is a 230V single-phase electronic switchboard developed for the automation of sliding doors, sectional doors and barriers.

Triangular NICE unlock key for engines of the ROAD, ROBUS and TOO series.

Adjustable photocell with battery (from 0 to 210o) 12-24V The FT04 photocell (TX + RX) is specially designed for the industrial and private door market. The sensor complies with the regulations for motor doors in Europe. Its shape makes it easy to mount on the wall.

Plug-in receiver card Clemsa Mutated for 400 users, of 2 channels at 433,92 MHz and 868 MHz on the same receiver. Compatible with the Mutan and Mutan-II emitters.

External unlocking for spring and sectional hinged doors (ROSSO EVO).

Electronic plate Pujol Marathon II (previous version 04/2012) with built-in receiver Rollingcode 433 MHz.

Sliding engine unlocking lever assembly FAAC 740-741 with their respective screws and 1 saw key.

Parachutes for iron tilting doors of the flat type and UPN.

Issuer Clemsa Mutan-II Long range model NT LR with 2 channels, a Rollingcode 868 MHz system with an elegant and minimalist design.

Garage emitter BFT MITTO 2 channels, RollingCode at 433.92 MHz. Programming by a command already programmed or manually (according to the receiver model).

Engine Nice SHEL75 of 750N at 24Vdc for doors other, of circular cross-section and doors other, of circular cross-section (of 1 sheet), with pre-assembled guide in one piece of 2,850 mm. What. Includes receiver (built-in) and 2 NICE FLO4RCE controls.

Machinery for making pulp of fibrous cellulosic material, where one of the doors shall be fixed so that it is blocked by the top of the ground bolt.

Wi-Fi module to control from anywhere and in a simple way, all automated devices MOTORS, TOLDOS, LIGHTS, by means of the ART range of CAME.

Small module for opening garage door by a short burst of light, compatible with both cars and motorcycles.

The module has a jumper to select the voltage input as either positive or negative. Normally when it comes to halogen light it sends the voltage as positive, and for LED light it sends the voltage as negative.

Support CAME CHANTIER Ø45mm for compact box for tubular motors MONDRIAN 5.

Replacement towing vehicle Nice SHEL50 AND SHEL75.

I'm going to have to change the axle.

Emissor FAAC 2-channel XT2 SLH and 868 MHz frequency.

The programming or memorization of the new Emissor must be carried out by proximity or confrontation from an original command in operation.

* Special prices for professionals. Contact us to open your file.

A voltage of not more than 300 V2 channel, with a capacity of 400 codes or 1,000 codes, to be configured with the PC-Copy duplicator.

Manufacture from materials of any heading Erreka SIRIUS for the tilting engine.

Power supply input 230Vac and output 12Vdc of 35W.

24 V motor DEA model TEO 700 of 1000N, designed to drive other, of circular cross-section. What. It is the manufacturer's cheap and easy to install solution DEA.

Electromechanical motor of 24 V DC Erreka String draw for use in the manufacture of motor vehicles up to 35m2, for residential, community and industrial use.

Double inner and outer unlocking for electro-brake rolling engines.

Issuer of the copy Remocon RMC166HS II for evolutionary code duplication at 433,92 MHz.

The duplication must be done with the machine Remocon HDC 900.

Machinery for making pulp of fibrous cellulosic material V2 VEK for detecting the presence of vehicles with sensitivity setting, models with 1 or 2 relays.

Garage crew CAME model TOP-432EE with two channels, fixed code at 433.92 MHz with self-learning recording system with a pre-programmed control on the receiver.

A length of not more than 50 mm with a metal insert for canisters with a maximum weight of 500 kg.

Microwave motion detection radar up to 3000 mm in height.

Replacement nylon pinion for engines TMP of the SPRINT LOW series.

The most complete and best-selling duplicator on the market for parking emitters with free upgrades.

It is the remote control duplicator most notable for its uSB connection to computer, enabling rapid and efficient duplication of remote controls, also includes functions for the installer.

Functions: analyze copy and original controls, read memories (GO, JCM, Nice, MutanCode, etc.), generation of original emitters and access control (for installers).

It allows us to generate different controls without having to have it physically like: MUTAN, ERREKA, PUJOL, SMILO, GIBIDI, DEA, IT IS RECOMMENDED THAT THE FOLLOWING CONDITIONS BE MET:, DITEC, I'M NOT GOING TO TELL YOU, KINGGATES.

Garage crew Clemsa Mutan-II model NT 82 of 2 channels at 868 MHz. What. The new generation of Mutan-II transmitters offers you an uncopyable, double-encryption system. It's also compatible with Mutan and old receivers.

" The issuer Clemsa NT2 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT1 NT82S of the same characteristics"

Electromechanical gearbox engine 24 Vdc Nice TITAN HS with magnetic encoder for use in the manufacture of motor vehicles up to 3,7 m (TTN3724HS, TTN3724RHS), and for sheets of up to 6 m (TTN6024HRS, TTN6024HRS) AND.

Digital control panel 230V with encoder V2 CITY1-EVO for one- or two-leaf clover and slippers.

For use in the manufacture of motor vehicles, designed to offer a high level of flexibility of installation thanks to their compact size, the possibility of adjusting the head 90° horizontally, left and right (180° total), and a wide input range of power supply 12-33 V AC and 15-35 V DC. What. Nominal range of 20 meters.

Electromechanical bollard Motorline of stainless steel 304, suitable for preventing traffic and reserving parking spaces. Opening speed of 0,06 m/s.

Its integral construction in stainless steel and PVC makes it an anti-vandal bollard, suitable for being buried in the ground.